answersLogoWhite

0

What else can I help you with?

Related Questions

Is a 2000 Chrysler lhs headlights interchangeable with a 2000 Concorde?

NO. the 99, 00, and 01 lhs have 3 bulbs in the headlight, a blinker, high beam and low beam. The Concorde 02,03, & 04 will interchange/work. The 2000 Concorde has only 2 bulbs (high and low beam)...


Does a headlamp from a 2000 Chrysler Concorde fit a 2000 Chrysler LHS?

NO. the 99, 00, and 01 lhs have 3 bulbs in the headlight, a blinker, high beam and low beam. The Concorde 02,03, & 04 will interchange/work. The 2000 Concorde has only 2 bulbs (high and low beam) and has a different front facia (bumper) to meet turn signal requirements. The sad part is the mounting screws do match up and there is a difference of several hundred dollars cost between these models, but the signal lights will not work properly if interchanged with the 2000 Concorde.


What causes a 2000 cavalier headlight to work only on high beam?

Headlights that serve as a high and low beam have two different filiments in them. The low beam filiment is most likely burnt out. Time to replace it.


What would cause one headlight to work on low beam and the other to work on high beam?

High beam light is out!


Can high beam work but not low beam on same bulb?

Yes


Why does only one high-beam work?

A possible reason that only one high-beam will work is that the malfunctioning bulb is burnt out.


Why do your low beam lights work but not your high beam lights?

Bulbs blew


Why does the 1996 Crown Victoria high-beam not work when the high-beam indicator in the dashboard shows the lights are on and the fuses are fine?

possibley blown high beam light


What is wrong on a 2000 mercury sable if the low beam headlights don't work and the high beams does?

You may need to replace your dimmer switch.


Why dont your high beams turn on but your low beams both work on your 2000 ford expedition Is there a fuse for it?

It sounds like the low beam/high beam switch is bad. Fuses are not the problem since they are built into the headlight switch and would cause headlights to blink or not come on for both high and low beam headlights.


Your driving lights wont work but the high beam is ok?

Check fuses and high/low beam switch.


Why does your high beam work but your low beam doesn't on a 1981 Honda Goldwing Interstate motorcycle?

The high beam may be blown. ---- Bad relay.