There could be a fouled out spark plug that would cause this. However the carburetor is the most common issue with these symptoms.
An engine usually has a higher idle speed when the ac is running. If the high speed idle does not operate then the ac will cause the engine to stall.
bad driving technique a clutch fault a misfire in the engine and having your bite point too high or releasing the clutch to quik
It sounds like your engine is not getting enough fuel, try checking the fuel filter.
High Bypass turbofan engines use pneumatics (air) for starting the engines.
Yes, the Homelite ST-145 is equipped with a two-cycle motor. This type of engine typically requires a mixture of gasoline and oil for operation. Two-cycle motors are known for their lightweight design and ability to deliver high power for their size, making them suitable for handheld tools like string trimmers.
Your car will idle high until the engine begins to warm. You could set the idle to be a bit lower, but that may cause the engine to stall out when it's cold out. The engine should begin to lower the RPMs when it is warmed up.
Yes, a faulty ignition coil can cause an engine stall. The ignition coil is responsible for generating the high voltage needed to ignite the air-fuel mixture in the engine's cylinders. If it malfunctions, it can lead to misfires, reduced power, or complete engine failure, resulting in stalling. Regular maintenance and timely replacement of a failing ignition coil are crucial to prevent such issues.
The proper gas mixture for a Homelite 20611R, which is a 2-stroke engine, typically requires a mix of gas and 2-cycle oil in a ratio of 50:1. This means you should mix 2.6 ounces of 2-cycle oil with 1 gallon of unleaded gasoline. Always ensure to use a high-quality oil specifically designed for 2-stroke engines for optimal performance and engine longevity.
The Homelite HB-180 leaf blower requires a fuel-to-oil mix of 50:1. This means you should mix 2.6 ounces of 2-cycle engine oil with 1 gallon of gasoline. Always use high-quality, 2-cycle oil for optimal performance. It's important to mix the fuel properly to ensure the engine runs efficiently and to prevent damage.
Yes, vapor lock can stall your engine. It occurs when fuel in the fuel lines or carburetor vaporizes due to high temperatures, preventing liquid fuel from reaching the engine. This interruption in fuel supply can lead to engine stalling, especially in hot weather or under heavy load conditions. Proper fuel system design and maintenance can help mitigate the risk of vapor lock.
The rpms need to be high enough to keep the engine running. Most engines need at least 850 rpms to keep from stalling.
The Homelite 10520A chainsaw typically uses a gas-to-oil ratio of 40:1 for its two-stroke engine. This means you should mix 3.2 ounces of two-stroke oil with one gallon of unleaded gasoline. Always refer to the user manual for specific recommendations and ensure you use high-quality oil for optimal performance.