The seat belt electrical connection under the seat maybe be disconnected or cut.
To turn off the seatbelt chime in 2006-2008 Dodge Rams and some other newer Dodge vehicles, follow this procedure: Get in the vehicle, close the door, put on your seatbelt. Start the engine, wait for the seatbelt light to turn off. Within 30 seconds of the light turning off, unbuckle and re-buckle the seatbelt 4 times, making sure the seatbelt light responds (turns on and off) each time you unbuckle and re-buckle the belt. Ending with the seatbelt BUCKLED, turn off your engine. If done correctly, you will immediately hear one chime to verify the programming. To re-enable the chime, simply repeat this procedure. NOTE: Although the seatbelt chime will not chime constantly if your belt is not buckled while driving, it WILL still chime when you first start your engine, and the seatbelt light will stay on to remind you. The light can be deactivated also, but it is a much more complicated (and I feel unnecessary) procedure. WARNING!!!: DO NOT deactivate the seatbelt chime by cutting or splicing the wires to the seatbelt buckle under the seat. THIS WILL DISABLE YOUR AIRBAGS even if your belt is buckled!!! AIRBAGS are DEADLY if your belt is not buckled, so there is a sensor in the buckle which disables the airbags when the belt is not buckled. If you cut or splice these wires, you also disable that sensor. Turning off the chime using the programming option keeps your airbags working properly. Hope this helps, ENJOY YOUR DODGE!!! -Mike Vidal, Forked River, NJ
The chime sound comes out of the instument cluster.The chime sound comes out of the instument cluster.
Buckel your seatbelt and it will go off. If it is not going off with your seatbelt buckled, then take it to the dealer for repair.
there is no light chime fuse
Put on your seat belt and buckle it up. The chime will then stop.
There is no dedicated fuse for the door chime.
To turn off the seatbelt chime in 2006-2008 Dodge Rams and some other newer Dodge vehicles, follow this procedure: Get in the vehicle, close the door, put on your seatbelt. Start the engine, wait for the seatbelt light to turn off. Within 30 seconds of the light turning off, unbuckle and re-buckle the seatbelt 4 times, making sure the seatbelt light responds (turns on and off) each time you unbuckle and re-buckle the belt. Ending with the seatbelt BUCKLED, turn off your engine. If done correctly, you will immediately hear one chime to verify the programming. To re-enable the chime, simply repeat this procedure.
On a 1991 Dodge Spirit, the door chime is typically powered by the fuse labeled "CHIME" in the fuse box. This fuse is usually located under the dashboard on the driver's side. If the door chime is not functioning, checking and replacing this fuse may resolve the issue. Always consult the owner's manual for the exact fuse location and specifications.
Ask your dealer
To disable the seatbelt chime in a 2012 Honda, buckle and unbuckle the driver's seatbelt three times, then turn the ignition to the "on" position without starting the engine. After doing this, buckle the seatbelt and keep it buckled. Turn the ignition off and then back on again. The chime should now be disabled. Always consult your owner's manual for specific instructions related to your vehicle model.
There is not an individual fuse for the seat belt chime. Check your owners manual for the "enhanced saftey system" for a method to turn it off.
what you do is take it in to the shop and tell them and if that doesn't work sell it and buy a new one.