54 dived 15
No fluid, blown fuse, bad pump, plugged hose,
To spray water on the windshield of a 1991 Dodge Stealth, locate the windshield washer control, typically found on the end of the wiper stalk. Pull or push the stalk towards you to activate the washer pump, which will spray washer fluid onto the windshield. Ensure the washer fluid reservoir is filled with the appropriate fluid to avoid damaging the system. If the spray doesn't work, check the fluid level and inspect the pump and hoses for any blockages or leaks.
If the windshield washer on your 2008 Dodge Caliber is not working, first check the washer fluid level and refill if necessary. Next, inspect the washer pump fuse in the fuse box; if it's blown, replace it. Additionally, ensure the washer nozzles are not clogged and that the pump is functioning by listening for any sounds when the washer switch is activated. If these steps don't resolve the issue, the washer pump may need to be replaced.
need windshield washer motor
No
Any brand washer fluid will work.
No
To get water for the windshield, you typically need to press the windshield washer control, which is usually a lever or button located on the steering wheel or the turn signal stalk. This action activates the windshield washer pump, sending washer fluid through the nozzles onto the windshield. Make sure the washer fluid reservoir is filled for it to work effectively.
Same engine? If so then yes.
The auto will not work, they use different control types.
No
Possibly freezing. Make sure you are using Windshield Washer Fluid and not water.