If your 1987 Reliant is overheating after changing the radiator heater valve and thermostat, it could be due to several factors. First, ensure that the thermostat is installed correctly and is functioning properly; if it's stuck closed, it will restrict coolant flow. Additionally, check for air pockets in the cooling system that may have formed during the repairs, as these can impede coolant circulation. Lastly, verify that the radiator and heater valve are not blocked and that the water pump is working effectively to maintain proper coolant flow.
On a 1988 Plymouth Reliant with a 2.2L engine, the electric fan thermostat is typically located near the engine's cooling system, often mounted on or near the radiator or in the engine block. It may be integrated into the cooling fan relay or found in the wiring harness connected to the fan. For precise location, consulting the vehicle's service manual or wiring diagrams is recommended, as placement can vary slightly based on specific models and configurations.
i have changed the alternator and voltage regulator and it still wont charge ; 84 Plymouth reliant
To set the timing you unplug the temp. sensor in the thermostat housing and set the timing to 12 degrees before T.C. with the automatic trans.
Reliant was created in 1935.
That is the correct spelling of the word "reliant".
The student was reliant on money from home
Reliant Rebel was created in 1964.
Reliant Regal was created in 1953.
Reliant Center was created in 2002.
Reliant Sabre was created in 1961.
Plymouth Reliant was created in 1981.
Reliant Kitten was created in 1975.