how do i reset srs light on scion tc
how do i reset srs light on scion tc
You have a defective airbag. You replace that bag.
Yes, a blown or missing fuse can cause the airbag light to stay on.
I believe that the airbag light staying on, is an indication that there is a problem in the airbag system. I'd get it to a mechanic to have it looked at if I were you.FriPilot
get your airbag looked at it might need servicing
The airbag light comes on at start up for a bulb check. It will stay on when the computer detects a malfunction and sets a code.The airbag light comes on at start up for a bulb check. It will stay on when the computer detects a malfunction and sets a code.
To reset the airbag light on a 2004 Scion xA, first, ensure the ignition is turned off. Then, locate the OBD-II port under the dashboard and use an OBD-II scanner to read the trouble codes; clear them to reset the light. Alternatively, you can disconnect the car battery for about 10 minutes to reset the system. Remember to reconnect the battery and check if the airbag light remains off after starting the vehicle.
When these light stay on its an indication that something is wrong and needs to be serviced.
The airbag light stays on when the computer detects a malfunction and sets a code.
The airbag light on a 2003 Mazda Tribute will stay on if a defect is detected in the system. This can include the sensor or the airbag itself which should be immediately repaired.
The airbag computer will command the airbag warning light to stay on when it detects a malfunction. You need to have the code read with a scan tool to know what the possible causes could be.The airbag computer will command the airbag warning light to stay on when it detects a malfunction. You need to have the code read with a scan tool to know what the possible causes could be.