answersLogoWhite

0

This is a common feature for vehicles since the 90s.

How I use mine:

  • Trip a is for this fuel tank so I can monitor how far I make on a tank
  • Trip b is for total trip distance or for my city car distance between services.
User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you reset mpg on citroen xsara picasso?

To reset the MPG (miles per gallon) display on a Citroën Xsara Picasso, turn on the ignition without starting the engine. Use the trip computer button, usually located on the stalk or dashboard, to navigate to the fuel consumption display. Press and hold the button until the display resets to zero. This will clear the current MPG reading, allowing you to track fuel efficiency from that point onward.


How do you reset speedometer on a Citroen Zsara?

To reset the speedometer on a Citroën Xsara, first, turn the ignition key to the "ON" position without starting the engine. Then, press and hold the trip odometer reset button (usually located on the dashboard) until the display resets to zero. This process typically clears the trip distance and may reset the speedometer reading, but the regular odometer remains unaffected. If the speedometer isn't functioning correctly, it may require further diagnostic checks.


How do you Reset trip meter to 0 on citroen c3 Picasso?

To reset the trip meter to 0 on a Citroen C3 Picasso, locate the trip meter button on the dashboard or near the instrument cluster. Press and hold this button for a few seconds until the trip meter resets to zero. If there are multiple trip meters, ensure you're resetting the correct one by checking the display. Always refer to the owner’s manual for specific instructions related to your model year.


Can you make a citroen xsara Picasso display speed in kph rather than mph?

yes use the same button as you use to change the hour in spring and autumn. keep pressing until the last option is mile/km If you've got the trip computer it changes the fuel use as well from mpg to l/100km


How do you reset mpg on 2010 Lexus?

To reset the MPG (miles per gallon) on a 2010 Lexus, turn on the ignition without starting the engine. Press the "Trip" button on the dashboard until you reach the "Trip A" or "Trip B" display. Once on the desired trip display, press and hold the "Trip" button again until the trip distance resets to zero, which also resets the MPG calculations for that trip.


How do you reset the service light on a Citroen Xsara Picasso?

Step-by-step:Turn ignition off completelyHold down the trip meter button (000.0) on the dashboard.Whilst holding the button, turn ignition to 2nd click.A countdown will appear on the screen starting at 10 and going to 0.Once the countdown gets to 0, release the button.A confirmation message will display saying "==0==".Turn the engine on.


How can you reset the service clock on your citroen C3?

Press and hold down the trip reset button on the dashboard with the ignition switched off.Turn on the ignition while still pressing the trip reset button till you see zero on the screen. Switch off the ignition and it should reset your service clock.


How do you change the display on Mondeo dashboard from kilometers to miles?

To change the display on a Ford Mondeo dashboard from kilometers to miles, you typically need to access the vehicle's settings through the infotainment system or dashboard menu. Look for the "Settings" or "Display" option, then navigate to "Units" or "Measurement Units" and select "Miles" instead of "Kilometers." If your model has physical buttons, you might also find a "Trip" or "Menu" button that allows you to toggle between the two. Consult your owner's manual for specific instructions based on your model year.


Reset service light on citroen C3?

You press and hold down the trip reset and then turn on the ignition. The LCD odometer display then counts down and when gets to zero the service reminder has been reset. This also works on a Picasso.


Where is the trip odometer on a 2007 Jeep Grand Cherokee?

In a 2007 Jeep Grand Cherokee, the trip odometer is located on the instrument cluster, which is directly in front of the steering wheel. You can toggle between the trip odometer and the main odometer using the trip reset button, typically found on the dashboard or on the cluster itself. To reset the trip odometer, press and hold the button until the display resets to zero.


Does the alpha romeo 156 show outside temperature?

it shure does, just press the km button on the dashboard, and it will alternate the display on the lcd between (trip) km and outside temp. the button is behind the lights lever on your left hand side ( right beside the light intensity button for the dashboard). Jose


How do you change display from metric to English 2004 sorento?

To change the display from metric to English units in a 2004 Kia Sorento, locate the trip computer button on the dashboard or steering wheel. Press and hold the button until the display changes from metric to English units. If this does not work, refer to the owner's manual for specific instructions related to your vehicle's model.