Heaters prior to 1978 had "standing pilots" meaning they were on continuously, just like our water heaters still use today, since then laws enacted made a standing pilot for California illegal and the country followed Ca law.
The pilot light on the stove may keep going out due to a dirty or clogged pilot light assembly, a faulty thermocouple, or a lack of gas flow. It is important to clean the pilot light assembly and ensure proper gas flow to prevent the pilot light from going out.
To turn on the pilot light on a gas appliance, locate the pilot light button or knob and turn it to the "pilot" position. Then, press and hold the button while using a long lighter to ignite the pilot light. Keep holding the button for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.
The pilot light may keep going out due to a dirty or faulty thermocouple, a draft in the area, insufficient gas flow, or a problem with the gas supply.
The water heater pilot light may keep going out due to issues with the thermocouple, a draft in the area, or a problem with the gas supply.
There could be a draft causing the pilot light to go out.
The pilot light on a furnace may keep going out due to issues with the thermocouple, a dirty or clogged pilot light orifice, a faulty gas valve, or insufficient gas flow. Regular maintenance and cleaning can help prevent this issue.
Your furnace pilot light may keep going out due to issues such as a dirty pilot light, a faulty thermocouple, a draft in the area, or a problem with the gas supply. It is important to have a professional inspect and repair the furnace to ensure safe and efficient operation.
To start a pilot light on a gas appliance, you typically need to locate the pilot light button or knob on the appliance. Turn the knob to the pilot position and hold it down while you use a long lighter or match to ignite the pilot light. Keep holding the knob down for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.
To light a pilot light on a wall heater, locate the pilot valve and turn it to the "pilot" position. Hold down the control knob and use a long lighter to ignite the pilot flame. Keep holding the knob for about 30 seconds to allow the thermocouple to heat up. Release the knob and the pilot light should stay lit.
To light a gas heater with an electronic pilot, locate the pilot light button on the heater. Press and hold the button while simultaneously pressing the ignition button. Keep holding the pilot button for about 30 seconds to allow the pilot light to ignite. Release the pilot button and adjust the temperature as needed.
To turn the pilot light on, locate the pilot light button or knob on your appliance. Hold the button down and simultaneously press the ignition button to spark the flame. Keep holding the pilot light button for a few seconds to allow the flame to ignite and stay on.
Spillage