answersLogoWhite

0

debris in seal. If alloy rims, there may be corrosion around the valve. Old or rotted out rubber valve.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What controls how much air is supplied to put on the brakes?

The treadle valve.


What lever is connected to the brake pedal and controls how much air is sent to the brake chambers?

Treadle valve.


How do you change the egr valve on a 2002 Ford Escape?

How do you replace the EGR Valve on a 2001 Ford Escape?


Where is brakelight switchon 1979 peterbuilt truck?

On most (if not all) treadle valves available since FMVSS121 went into effect, both brake light switches (for the truck and trailer) run off of the line coming from the secondary chamber of the treadle valve to the quick release valve for the steer axle brakes.


How can you tell you have no air in brakes?

If they're spring brakes, you won't be able to get them to release. The brake chambers won't actuate when you push on the treadle valve (brake pedal), the brake control valve won't remain pressed in.


Why is there oil and exhaust coming out of the dipstick hole on a 22re?

Your positive crankcase ventilation valve, or PCV, is probably stuck closed. The PCV vents crankcase pressure from the engine into the intake. When this valve sticks closed the pressure has to escape somewhere and it normally will escape through the dipstick tube.


What is a ball valve?

A ball valve is a contrivance by which a ball, placed in a circular cup with a hole in a bottom, operates as a valve.


How do you find the radiator drain valve on your radiator on a 2001 Monte Carlo SS?

radiator drain valve is located at the bottom of the radiator, there is an access hole through splash guard.


Why is my anti siphon valve leaking from the top?

Your anti-siphon valve may be leaking from the top due to a damaged or worn-out seal or gasket. This can allow water to escape through the top of the valve instead of flowing through the proper channels. It is important to replace the faulty seal or gasket to prevent further leakage.


What is a qr1c quick release valve and how do you troubleshoot it?

QR-1C valve takes air from the PP-1 or MV3 valve. That air goes through a line to the inlet of the QR-1C valve. As it does, it pushes down a diaphragm, which covers the exhaust port. Thus, the air is piped out of the outlet ports to the spring brake side of the brake chamber. When the air supply is removed, the diaphragm returns to an open state. This opens the exhaust port, and air from the spring brake chamber is evacuated out through it. If it's leaking air, if your brakes aren't releasing, if your brakes aren't setting when you pull the yellow brake control valve, or you get air exhausting steadily through the treadle valve with the brake control valve pressed, an issue exists.


How a bottom blow down valve differ from a surface blow down valve?

their difference is very simple. surface blowdown valve is for light impurities while bottom blowdown valve is for heavy impurities such as sludge, etc.


Where is the PCV valve located on a 2005 ford escape 4 cylinder?

The PCV valve on a 2005 Ford Escape 4 cylinder is located behind the alternator. It is under the intake manifold.