3cyl geo metros
Cam bearings are pressed into the block therefore there is NOT an adjustment.
It is inside the air intake with the air filter.
My 92 model Geo spark Plug gap is 0.39 thousands of an inch. One Liter 3cyl/5sp. Plug is a ngk BPR6ES-11 Hope this helps
I don't know what would be the top speed but I made 84m/h with 993cc 3cyl Geo Metro. GPS verified. Hope this helps.
I HAVE HAD A GEO METRO IN 1 FORM OR ANOTHER SINCE 1987. TO ANSWER THE QUESTION ON ENGINE COMPATIBILITY ANY METRO 3CYL ENGINE FROM 1989 -1997 WILL WORK. I PREFER 1993.5 UP DUE TO A MORE DURABLE TIMEING BELT
manually under the hood.
have the Fuel injectors checked out.
Engines SHOULD idle a little faster during startup, but if it's always idling fast, check for vacuum leaks. Make sure the EGR valve isn't leaking as well.
To adjust the idle on a 1997 Geo Tracker, first, ensure the engine is warm and then locate the idle speed adjustment screw on the throttle body. Use a screwdriver to turn the screw clockwise to increase the idle speed or counterclockwise to decrease it. It's important to check the RPM with a tachometer to achieve the manufacturer-recommended idle speed, typically around 750-800 RPM for this vehicle. After adjustments, ensure the engine runs smoothly and recheck the idle after a test drive.
No, It Didn't
Yes!! There is a header available for the Suzuki g10, 1.0 liter, 3 cylinder engine! You can find this very easily at "suzukird.com" You have the option of a flange, and/or an o2 sensor bunghole!