Well yes possible, but remember you will lose all your brake fluid possible when you remove the brake hose, and you may also have to bleed the brake system to get all the air out.
A defective brake hose must be replaced. There is no way to fix it.
No fixing that one, replace it with a new one.
A brake rotor heating up would probably be caused by a sticky brake caliper or a collapsed brake hose.
Using a hose to fix a leaky brake line is not a safe or recommended solution. While a hose might temporarily seal a small leak, it lacks the strength and durability required for a critical safety component like a brake line. It's essential to replace the damaged brake line with a proper metal or high-pressure rubber line to ensure the braking system functions effectively and safely. Always prioritize safety and consult a professional mechanic for brake repairs.
A brake team will typically give you premium brake pads or fix them, they will machine the rotors, they will grease for non sealed bearing, they will bleed the brake fluid and all of the other labor it takes to fix your brakes.
You don't normally fix the power steering hose. Buy a new hose at an auto parts store.
get a new hose
check fuses, check brake light switch behind brake pedal.
The easiest way to fix a 1988 Ford Bronco gas hose leak is to replace the hose. You can also patch the week in the hose.
If the bypass hose on the 2000 Cavalier is rubber then the hose can be cut and spliced together with a coupling to fix the leak. If the hose it metal then it will need to be replaced.
Your bike brake may be rubbing due to misalignment or wear on the brake pads. To fix it, you can adjust the brake caliper position or replace the brake pads if they are worn out.
To fix a loose vacuum hose on a 2002 GMC Envoy, it can be clamped with a small hose clamp. Use a metal clamp that can be adjusted to fit the small hose.