A qualified machine shop can resurface the head for you, let them determine if it can be savaged. You have to replace it - depending on how badly warped it is
When an engine overheats the head or block or both can crack or the head and/or block can warp or you can be lucky and none of the above might happen. If the head warps your head gasket will fail. If the head and/or block crack you will need to find replacments. If the block warps you will need to bore the cylinders and align bore the lower end. None of the above are cheap.
Pretty sure it is because of any unused reserved maps.
does nanotechnology ( head gasket and block repair) fix blowen head gasket
She would fix your head only if she is a doctor.
The only fix is to remove the head and replace the gasket.
Replace the head gasket is the only fix.
If you remove the head then of course you replace the head gasket.Where can you get sodium silicate to fix a blown head gasket?Know that adding sodium silicate to an engine is only a temporary fix for a blown head gasket and will not permantly fix the problem. The only permanent fix is to replace the head gasket. I would never add any head gasket fix material to any engine.
You can't fix a cracked head unless you can weld. it must be replaced with a new head.
No
No, the only permanent fix for a blown head gasket is to replace it.
Remove the head and replace the gasket. No other way to fix it.
No it will not. The only thing that will fix a blown head gasket is to replace the gasket.