answersLogoWhite

0

If the rim is welded to the tire, yes. You can change it, but you have to replace both the rim and the tire which will cost a lot.

If the rim is welded to the vehicle itself, no. You cannot change it.

In either case, having a welded rim is technically illegal in the US if you drive it on the road. If you don't, then it's not a problem

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Does rim or tire size change mph?

A change in overall tire height will change speedometer accuracy.


How can I change a bike tire without using levers?

To change a bike tire without using levers, you can try using your hands to carefully push the tire off the rim. Start by deflating the tire completely, then use your fingers to push the tire bead towards the center of the rim. Work your way around the tire until it is completely off the rim. Be patient and careful to avoid damaging the tire or rim.


What if your standard rim size is 17in . Does fitting a 18in rim change the mph?

The way to do that is to change the sidewall height of the tire also. You want an 18" tire with the same overall diameter as the 17" tire.


How can a tire lever for a bike be used to efficiently change a flat tire?

A tire lever for a bike can be used to efficiently change a flat tire by inserting it between the tire and the rim, then levering the tire off the rim to remove it. This makes it easier to access the inner tube for repair or replacement.


What you need to change a tire?

To change an actual tire you need a tire machine to get it off the rim and the new one on. -If you mean the change the WHEEL and tire on a car, then you just need a jack and a tire wrench.


What are the best techniques for using bicycle tire irons to efficiently change a flat tire?

To efficiently change a flat tire using bicycle tire irons, follow these techniques: Remove the wheel from the bike. Use the tire irons to pry the tire off the rim. Work the tire irons around the rim to fully remove the tire. Replace the inner tube and re-seat the tire on the rim. Use the tire irons to carefully re-inflate the tire and reattach the wheel to the bike.


How can I effectively use a tire lever to change a bicycle tire?

To effectively use a tire lever to change a bicycle tire, first, remove the wheel from the bike. Then, insert the tire lever between the tire and the rim, and gently pry the tire off the rim. Work your way around the tire, using multiple tire levers if needed. Once the tire is off, replace or patch the inner tube, then re-seat the tire on the rim by pushing it on with your hands. Finally, inflate the tire to the recommended pressure and reattach the wheel to the bike.


How can a tire lever be used effectively to change a bike tire?

To change a bike tire effectively using a tire lever, first, remove the wheel from the bike. Then, insert the tire lever between the tire and the rim to pry the tire off. Work your way around the tire, using the lever to gradually remove the tire from the rim. Once the tire is off, replace it with a new one by using the lever to help stretch the tire onto the rim. Finally, inflate the tire to the recommended pressure and reattach the wheel to the bike.


How to properly change a high psi bike tire?

To properly change a high psi bike tire, follow these steps: Release the air from the tire by pressing the valve stem. Use tire levers to remove the tire from the rim. Inspect the tire for any damage and remove any debris. Insert the new tire onto the rim, starting at the valve stem. Use the tire levers to carefully push the tire onto the rim. Inflate the tire to the recommended psi using a pump. Check the tire pressure with a gauge and adjust if needed. Double-check that the tire is securely seated on the rim before riding.


How can you put a tire back on the rim?

Take the tire and the rim to a tire shop. It requires special equipment to properly replace the tire and balance the rim.


How can I get a tire back on a rim?

To get a tire back on a rim, you can use tire irons or a tire changing machine to carefully pry the tire onto the rim. Start by lubricating the tire bead and rim with soapy water to make it easier to slide the tire on. Use the tire irons to gradually work the tire onto the rim, being careful not to damage the tire or rim. Once the tire is on, inflate it to the recommended pressure and check for any leaks.


How can I remove a tire stuck on a rim?

To remove a tire stuck on a rim, you can use a tire iron to pry the tire off the rim. Start by loosening the lug nuts, then lift the tire and rim off the ground. Use the tire iron to carefully pry the tire off the rim, working your way around the tire until it is completely removed. Be cautious and patient to avoid damaging the tire or rim.