Make a paste of Tide detergent and hot water. Scrub it into the concrete and let dry. Rinse off with a hose.
This answer was emailed to me from ArmorAll customer service.
To remove tire stains from a sealed concrete driveway, try using a commercial degreaser or a mixture of warm water and dish soap. Scrub the stained area with a brush or scrubbing pad, then rinse with clean water. For stubborn stains, you may need to repeat the process or use a specialized concrete cleaner.
Remove your air cleaner housing, left front tire. unplug and unbolt your alternator and remove it up throw the air cleaner area.
The battery is located under the air cleaner, in front of the rf tire. You will have to remove the air cleaner and inner fender liner to access.
To Properly Detail a car's tires, you need to use a Tire Cleaner, All Purpose Cleaner, or Degreaser to remove all of the grime. Simply hose off the tires, spray on the Tire cleaner, wait 60 seconds, then scrub the cleaner with a brush, then rinse off again. Once Dry, Apply a Tire Dressing. They come in Liquid, Aerosol, and Gel Form. Gel Is the longest lasting. Simply apply it with a foam applicator.
It is on the drivers side and on the back side of the engine. You have to take off the air cleaner and the left front tire to remove the alternator. Pull it up throw the air cleaner area to remove it after unbolting and unplugging it.
To clean your brakes without removing the tire, you can use a brake cleaner spray and a brush to remove dirt and grime. Simply spray the cleaner onto the brake components and use the brush to scrub away any buildup. Be sure to follow the instructions on the cleaner and wear protective gear.
I tried those store bought cleaners for concrete, and they kind of worked, but they were still there. So i used some regular dish soap and a scrub brush and it worked great. marks are gone now! The Quickest Answer: Simple, cheap, Auto Brake Cleaner! You can buy at any auto parts store, grocery store, etc. for a few dollars. Spray it directly on the tire marks and they dissolve. No scrubbing, no buckets of soapy water, no $50 per hour power washer rental. Works good on plain or painted concrete, without damaging the concrete itself.
It is under the air cleaner housing. You can get to it from under the bike near the rear tire. The fuel pump is directly in front of it but you have to remove the air cleaner housing to get to it. Hope this helps.
if the concrete is not sealed its possible , it will cause the concrete to become slippery .
No.
Bike tire armor is effective in protecting against punctures and increasing the lifespan of the tire by providing an extra layer of protection. It can help prevent sharp objects from penetrating the tire and causing flats, ultimately extending the life of the tire.
To remove a bicycle tire, first release the brakes and deflate the tire. Use tire levers to pry the tire off the rim. Pull the inner tube out and then remove the tire completely.