helicoil
If the bolt is stripped, you can try using a different tool or method to remove it, such as using a screw extractor or tapping a larger size bolt into the stripped hole. If these methods don't work, you may need to seek professional help to remove the stripped bolt.
To remove a stripped Allen bolt using an extractor, first drill a small hole into the center of the bolt. Then insert the extractor into the hole and turn it counterclockwise to grip the bolt. Use a wrench to turn the extractor and remove the bolt.
To tighten a stripped Allen wrench bolt, you will need a helicoil or a thread repair kit.
When the belt tensioner fails, you have to stop almost immediately or the engine will overheat and suffer serious damage or destruction. I am assuming that the bolt itself is not stripped; the receiving mounting hole in the engine is stripped. And I am pretty sure that the mounting area is aluminum. Therefore, it should be fairly easy to tap the hole for an over-sized bolt. Select a tap that is just larger than the stripped bolt. I would not recommend the JB weld since if it fails, you are stuck without warning. Best of luck!
To fix a stripped screw hole, you can use a larger screw, fill the hole with wood glue and toothpicks, or use a screw repair kit.
To repair a stripped screw hole in wood, you can fill the hole with wood filler or a wooden dowel, then re-drill a pilot hole and insert a new screw. Alternatively, you can use a larger screw or a screw anchor to secure the wood.
To effectively remove a stripped allen bolt, use a tool called a screw extractor. First, drill a small hole into the center of the bolt. Then, insert the screw extractor into the hole and turn it counterclockwise to grip the bolt. Finally, use a wrench to turn the extractor and remove the bolt.
You can find a door hinge stripped screw hole repair kit at most hardware stores or online retailers specializing in home improvement products.
To rethread a stripped or damaged bolt hole, you can use a tap and die set. First, select the appropriate tap size for the bolt hole. Then, carefully thread the tap into the hole in a clockwise direction to create new threads. Be sure to use lubricant to make the process easier. Once the new threads are formed, you can test the fit with a bolt to ensure it is secure.
To repair a stripped wood screw hole, you can fill it with wood filler or toothpicks and wood glue, then reinsert the screw. Alternatively, you can use a larger screw or a screw anchor for a more secure hold.
If the bolt head is stripped, you can try using a rubber band or a specialized tool like a bolt extractor to remove it. If those methods don't work, you may need to drill out the bolt and re-tap the hole. It's important to be careful and patient when dealing with stripped bolts to avoid causing further damage.