0
U dajust the rear Drum brakes if so equipted if it has dsc in the front.
If you mean that your foot goes to the floor without resistance the first time, but not the second, you need to have your master cylinder checked out, and possibly replaced.
I have also seen this problem caused by condensation in the brake fluid caused by old fluid. The adjusting the first poster talks about is only for adjusting the emergency brake *I thought*. I could be wrong on that. you may just need to bleed the brakes and get the air out of the system. the second pump compresses the air and makes pedal hard.
What else can I help you with?
What would keep rear brakes on motorcyle from working after you just fix them?
the brakes were not fixed properly some part is installed wrong
How can I fix the brakes on my bike?
To fix the brakes on your bike, first, check if the brake pads are worn out and need replacing. Next, adjust the brake cable tension if the brakes feel loose. Make sure the brake calipers are centered and aligned properly. Finally, test the brakes to ensure they are working effectively before riding your bike.
My car failed inspection due to unbalanced brakes what does this mean?
basically means that brakes are out of adjustment and not all working toether easy fix. just get someone to adjust them correctly
How can I fix a well pump that is not working properly?
To fix a well pump that is not working properly, first check the power source and circuit breaker to ensure they are functioning correctly. Next, inspect the pressure switch and pressure tank for any issues. If the pump still does not work, it may need to be repaired or replaced by a professional well pump technician.
How do you fix brakes on a 2002 cl 500?
how do you fix brakes on a 2002 Cl 500 Benz
Why has my sump pump stopped working and how can I fix it?
Your sump pump may have stopped working due to a clog in the pump, a faulty switch, or a power outage. To fix it, you can try cleaning out any debris, checking the power source, and testing the switch. If these steps don't work, you may need to call a professional for further assistance.
Where should I go to fix my brakes?
You should go to a certified mechanic or auto repair shop to fix your brakes.
How to fix the rear brakes on a bike?
To fix the rear brakes on a bike, first, check the brake pads for wear and replace if necessary. Next, adjust the brake cable tension to ensure proper braking. Make sure the brake calipers are aligned and centered on the wheel. Test the brakes to ensure they are working correctly before riding.
How do you fix the fuel pump when its not working?
For a temp fix, pound on bottom of tank a few times with a rubber mallet. It should start and run for a little bit.
How can I fix bleeding bike brakes to ensure optimal performance and safety?
To fix bleeding bike brakes for optimal performance and safety, follow these steps: 1. Gather necessary tools and brake fluid. 2. Remove the brake pads and calipers. 3. Attach a bleed kit to the brake lever. 4. Open the bleed valve and pump the lever to remove air bubbles. 5. Close the valve and reinstall the calipers and pads. 6. Test the brakes before riding to ensure they are working properly.
How can I fix loose bike brakes to ensure safe and effective cycling?
To fix loose bike brakes for safe cycling, first check the brake cable tension and adjust as needed. Next, tighten the brake caliper bolts and align the brake pads with the rim. Finally, test the brakes to ensure they are working properly before riding.
How to fix the front brakes on a bike?
To fix the front brakes on a bike, follow these steps: Inspect the brake pads for wear and tear. Replace them if necessary. Adjust the brake cable tension to ensure proper braking. Align the brake pads with the rim to ensure even contact. Test the brakes to ensure they are working properly before riding.
