To rebuild a 1985 Corvette headlight motor, first, disconnect the battery and remove the headlight assembly. Next, disassemble the motor by carefully taking apart the housing, noting the orientation and placement of each component. Clean and inspect the gears, brushes, and electrical connections for wear, replacing any damaged parts. Reassemble the motor with fresh grease, ensuring everything is aligned correctly, and then reinstall it into the headlight assembly.
== ==
I
== ==
hmm seems to me that the the light assembly mabye bent or that the sighn that the ,motor is on its way out Is there a stop switch?
Failed limit switch, or bad wiring. The motor will keep running until the headlight finds "home" ... ergo a failed limit switch as mentioned above. The sensor at the "home" position (headlight off) has to be tripped by the headlight assembly before the motor will shut down. The motor has no idea where the headlight physically is ... it keeps running until the switch is engaged.
70 horse 1985 mercury outboard
The fuel pump relay on a 1985 corvette is mounted on the firewall under the hood on the driver side. Just to the right of the wiper motor.
will a 1985 corvette hood fit a 1993 corvette
For a car as old as a 1985 model, it could be that the heater blower motor control module has gone out. A new one for a 1985 Corvette is around $165 to $175 at auto parts stores.
Try looking in a motor manual at your local library.
in the front (driver side) wheel well under a 6x6 cover mounted to the wheel well facing forward there are 3 relays 2 are for the headlight motors left and right
No there is no other relay.