clutch fan is removed with 2 special tools. these are available at auto stores.they are not cheap. also remember the clutch fan screws onto water pump, and has left hand thread,so you will need to turn it clockwise to remove
With a fan clutch removal tool from an auto parts store.
Type yourdsfsdf answer here...
Unless the fan clutch is bad just remove it with the water pump. Otherwise it is a 36mm fan clutch wrench that most auto parts stores have for rent.
Remove the fan itself then remove the clutch from the fan
Lefty loosey, righty tighty.
230 deg. F.
you have to have fan clutch wrenches
Remove the fan belt, by loosening the tensioner pulley. Remove the fan clutch with the retaining bolts. Reverse the process to install the new fan clutch.
To remove the fan clutch on a Chevy Tahoe, the upper fan shroud must first be removed. Once removed, a tool is needed to hold the clutch in place to allow for the fan to be removed. The nuts must be unscrewed on the fan in a counterclockwise rotation. Remove the nuts on all side and the fan clutch will remove.
how to remove the clutch fan on the 530i bmw
To separate the clutch fan from the water pump on a 1996 Ford Aerostar Van, first, ensure the engine is cool and disconnect the negative battery cable. Remove the fan shroud for better access, then use a wrench to hold the water pump pulley in place. Use a socket and ratchet to remove the bolts securing the fan clutch to the water pump. Once the bolts are removed, carefully pull the fan clutch off the water pump shaft.
You need to buy the special wrench for it or make one of your own.