Brake rotor removal varies on different vehicle. You must first remove the caliper. Some brake rotors simply come off after this. Some rotors are fastened to the hub by screws. Some rotors are bolted to the hub, and the wheel bearings must be removed.
In most Fords the rotor will come off when you unbolt the brake caliper.
replace front brake discs and pads.
Are you asking about brake discs?A re't they slip off rotors? remove the front tires then the calipers then slip off the rotors.
To change the front discs and pads on a Renault Trafic, first, lift the vehicle and remove the front wheels. Then, unbolt the brake caliper and support it without disconnecting the brake line. Remove the old brake pads and the disc by unscrewing the retaining screws. Install the new disc, replace the pads, reattach the caliper, and ensure everything is secure before lowering the vehicle and testing the brakes.
there are brake shoes in the discs too . just remove the discs and you will see them. they are applied by a cable.
By going to the nearest service!
Remove the front tires and wheels. Remove the brake assembly. Tap on each rotor disk to loosen them. Slide the rotor disk off. Reverse the process to install the new rotor disk.
To replace the front brake discs on a Transit 350, begin by safely lifting the vehicle and removing the front wheels. Next, remove the caliper by unbolting it, taking care to support it to avoid straining the brake line. After removing the caliper, take off the brake pads and then unbolt the old brake disc from the hub. Finally, install the new disc, reattach the caliper and pads, and ensure everything is securely fastened before lowering the vehicle and testing the brakes.
= What tool to remove a front brake pads on a 2007? =
A car what has front disc and rear drum brakes have front brake pads and rear brake shoes.
you have to remove the caliper and the discs sieze on the hub plenty of wd40 and a big hammer make sure there are no grub screws holding the disc to the hub first
Jack up and block the car. Remove wheel, remove brake caliper. Rotor is now free.