Throttle position sensor signal does not agree with manifold pressure sensor signal.
Back of the engine, about 6 inches above the oil pan.
The crankshaft position sensor on the PT Cruiser is on the side of the engine above the oil filter. The sensor is removed with two screws. Unplug the wiring, remove the bolts, then install the new sensor.
Low oil, low oil pressure, failed oil pressure sensor.
No. The oil pressure sensor is not required for the engine to run.
It does not have a reset. If the oil light is on, the sensor has failed or the oil pressure is too low.It does not have a reset. If the oil light is on, the sensor has failed or the oil pressure is too low.
The external air temperature sensor on a Chrysler PT Cruiser is located in the front of the motor. It is in the air intake tube that goes from the air cleaner to the motor.
Trouble code P0452 means: Evaporative emission control system,pressure sensor low input
Chrysler does not use reset switches.Chrysler does not use reset switches.
It is called an oil pressure sensor socket.
cost me $200 , which included camshaft sensor
It is on the engine, just below the radiator cap.