I recommend you get a service manual; the one the dealer techs use not Chilton, etc.. Ebay usually have these for the specific year. If you are going to do any work on your car you will need the service manual. The head can be removed after you remove the intake and exhaust manifolds, valve cover,head bolts (the 16v engine requires some of the rocker arms be removed to get to the head bolts). The service manual will give a step by step procedure.
Yes as long as you change both heads.
so the head wont warp
waths the wey to torque the cylinder head
Yes
Remove the intake and exhaust manifolds. Remove the head. Torque the head and manifolds to the correct torque and sequence, you will need a repair manual for this.
Repairing the head gasket on a 1994 Isuzu Trooper involves several steps. First, you need to remove the intake and exhaust manifolds, as well as the cylinder head. After ensuring the surfaces are clean and flat, replace the old gasket with a new one, reassemble the components in the reverse order, and torque everything to the manufacturer's specifications. Make sure to check for any signs of warping on the cylinder head and replace it if necessary.
You will need to remove the cylinder head from your 1994 Chevy. Remove the head gasket and clean the surface. Put the new head gasket on and put the cylinder head back to its original position.
remove head and replace gasket :)
The 1994 Buick Century 4 cylinder head gasket will have to be removed and replaced. The head has to be removed, along with anything that is physically in the way of removal, before the head gasket can be removed.
Begin by removing the cylinder head from your Chevrolet S 10 four-cylinder engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder head to its original position.
about 1500 dollars
What is the torque for 1994 toyota starlet 1300 cc cylinder head