get a pocket knife or something sharp and pry up on switch, it just pops up then unplug wire and replace switch then push down to reinstall switch very simple as I just put in 2 of them in less than 5 mins.
no
The power window switch for the 2000 Mercury Cougar is located on the driver's side door panel. It is positioned near the armrest, allowing the driver to control all the windows from a single panel. If you need to access the switch for repairs, you may need to remove the door panel to reach the wiring and components behind it.
Remove the inside door panel of your 1997 Mercury Cougar. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
Put a brick through the window.
Remove the inside door panel of your 1999 Mercury cougar. The entire window mechanism will be visible. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
how to replace window toggle switch 1999 buick century
The yellow with green wire goes from the switch to the relay which is to the right of the speaker and then from the replay it changes to yellow and goes to the motor.
you have to replace the central switch cluster in whole. cant be repaired individually.
Defective passenger power window switch. It is stuck in the down position. Raise the window and immediately disconnect the switch until you can replace it.Defective passenger power window switch. It is stuck in the down position. Raise the window and immediately disconnect the switch until you can replace it.
Remove the decorative cover to the window switch panel. Remove the window switch retaining screws. Remove the wiring harness from the back of the window switch. Reverse the process to install the new window switch.
Your switch could be worn out you would have to replace the rocker to the switch or replace the whole window switch console.
See the link here to learn how to remove the window switch assembly (steps 1-3)... http://www.autoclinix.com/Mercury/Front%20Speakers2.htm