answersLogoWhite

0

The timing belt on a 1991 Plymouth Acclaim is replaced by removing the engine accessories, removing the timing cover, and taking pressure off the idler pulley. The belt can then be slipped off the sprockets, a new belt put in place, and the tension restored.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

Does the 1991 Plymouth acclaim have an interference engine?

No. A 1991 Plymouth Acclaim does not have an interference engine.


Where is voltage regulator in 1991 Plymouth Acclaim?

on alternator


What are the timing marks to replace the timing belt on a 2.5 4-cylinder 91 Plymouth acclaim?

To replace the timing belt on a 1991 Plymouth Acclaim with a 2.5L 4-cylinder engine, first align the timing marks on the crankshaft and camshaft. The crankshaft timing mark should align with the 0-degree mark on the timing cover, while the camshaft sprocket should have its mark pointing straight up or aligned with the mark on the cylinder head. Ensure that the tensioner is properly set before installing the new belt. Always refer to a repair manual for specific details and torque specifications.


Where is the inertia switch located in a 1991 Plymouth Acclaim?

Plymouth does not use inertia/reset switches


1991 Plymouth acclaim brake line metric or sae?

They are SAE


Was the 1991 Plymouth Acclaim a K car?

No it was had an AA body code.


What does the check the gas warning light on a 1991 Plymouth acclaim mean?

no what dose acclaim mean not gas and stuff


What is the oil capacity of a 1991 Plymouth acclaim 3.0 v6?

4.5 quarts


1992 Plymouth Acclaim what Refrigerant is to be used?

My 1991 Plymouth Acclaim manual says mine is R12, but I can't say for the '92 It was built with R12, should be retrofitted to R134a.


What is the Fuse amp for 1991 Plymouth acclaim radio?

10 amp... in socket # 20


Where is the thermostat on 1991 Plymouth acclaim?

In a 1991 Plymouth Acclaim, the thermostat is located in the engine compartment, specifically at the junction of the upper radiator hose and the engine. To access it, you'll need to remove the upper radiator hose and the thermostat housing. Once the housing is removed, you can replace the thermostat. Always ensure the engine is cool before attempting to work on the cooling system.


When the gas light comes on how far can you drive in a 1991 Plymouth acclaim?

Until you run out of gas...