if you have a GM product without the information display, turn the ignition to the run position do not start the engine. push the accelerator pedal all the way to the floor three times. it will take a few seconds to reset watch the big square red light on the dash when it changes from yellow back to red the oil change clock has been reset
To reset the oil change light, hold down the odometer and clock buttons for a few seconds. (with the ignition turned on).
Kick it or change the buttons in the back of the clock usually if you sit on it for an hour it will reset
How do you tune in the radio on a Peugeot 107 Active
To reset change oil light on Honda sh150i. Have key in off position, hold down the clock change button, while turning the key to on position, continue to hold for 2 sec while change oil light goes off.
Reset the change oil light on Mazda 3
Your owners manual should tell you how to reset the light.
There is nothing to reset except the radio presets and the clock.
How do you reset change oil indecator for caprice 2006?
how do you reset change the oil light in a 2004 alero?
Your owners manual should tell you how to reset the light.
No, all you need to reset is the clock and radio presets.
The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL message being turned on, reset the system. Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the CHANGE OIL message, do the following: 1. Press reset stem till it Displays "OIL LIFE" on the DIC.(3 times) 2. Press and hold the reset stem. The oil life will change to 100% and a beep will sound. 3. Turn the key to LOCK. If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. Hope This Helps.