0
To reset the oil life monitor in most (but not all) late model GM vehicles without a DIC:
1: Get in the car and close the door.
2: Depress and hold the brake pedal. You don't have to press it hard.
3: In sert the key into the ignition. If it's already in and turned on, shut it off.
4: Turn the key to the 'run' (but not crank) position, then fully depress and release the accelerator pedal three times within five seconds.
5: Turn the key to the 'off' position.
Some vehicles will notify you with a chime or, flashing light. Others may display the word reset. Some do not have any indication and the reset procedure should be done three times to be sure.
What else can I help you with?
How do you reset oil change light on a 2007 Ford Taurus?
o I want to reset the oil light on my 2007 mustang 6cyl.
How do you reset the change oil light on a 2007 Infiniti M45?
To reset the change oil light on a 2007 Infiniti M45, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Finally, turn the ignition off, and the oil change light should be reset. If it doesn't reset, repeat the process.
How do you reset oil maintenance light after oil change 2007 Corvette?
well
How do I reset oil change light on 2007 corvette?
go to your oil percentage then hit and hold reset button
How do you reset oil change light on 2007 ford expedition?
On mine, you press SETUP twice and then press and hold RESET
How do you reset the check engine light on a 2007 Pontiac Solstice?
To reset the check engine light on a 2007 Pontiac Solstice, you can use an OBD-II scanner to clear the trouble codes that triggered the light. Alternatively, you can disconnect the vehicle's battery for about 15 minutes, which should also reset the light. However, it's important to address the underlying issue that caused the light to illuminate in the first place to prevent it from coming back on. Always consult a professional if you're unsure about any steps.
Is there a reset button for a 2007 Pontiac g6?
Not for the fuel pump.
How do you reset oil change light on 2007 Toyota Sequoia?
To reset the oil change light on a 2007 Toyota Sequoia, first turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, turn off the ignition, then start the engine to ensure the oil change light has been reset. If the light remains on, repeat the process.
How do you reset low tire pressure warning light on a 2007 Pontiac Vibe?
To reset the low tire pressure warning light on a 2007 Pontiac Vibe, first ensure that all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. Start the engine again, and the warning light should reset if the tire pressure is correct.
How do you reset the change oil light on a 2007 Cadillac CTS?
To reset the change oil light on a 2007 Cadillac CTS, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal slowly three times within five seconds. Then, turn the ignition off and start the engine; the oil change light should be reset. If it remains on, repeat the process to ensure it was done correctly.
How do you reset engine light 2007 Mazda 3 after oil change?
To reset the engine light on a 2007 Mazda 3 after an oil change, you can use the following steps: Turn the ignition to the "ON" position without starting the engine, then press the gas pedal three times within five seconds. This should reset the oil change light. If the engine light remains on, you may need to check for any underlying issues or use an OBD-II scanner to reset the error code.
How do you reset oil on 2007 Mercury Montego?
How do you reset the oil life light on Mercury Mariner? Dealer didn;t reset at oil change & we are out of state now. Thanks
