take a hammer to the light
To reset the service indicator on a 2008 Mercedes CLK 350, turn the ignition key to the "On" position without starting the engine. Press the gas pedal fully three times within five seconds. After this, turn the ignition off and then start the engine to confirm that the service indicator has been reset. If the indicator remains, repeat the process.
Exactly the same as the 2008.
To switch off the service indicator on a 2008 Renault Clio, turn the ignition key to the "On" position without starting the engine. Press the trip reset button on the dashboard until the service indicator begins to flash. Once it starts flashing, release the button, and then press it again until the indicator turns off. This should reset the service light.
How do you reset 2008 honda element service light?
Just push in the clock adjuster and start engine hold down for 12 seconds it will clear
To reset the service indicator light on a 2008 Renault Mascott van, first, turn the ignition key to the "ON" position without starting the engine. Then, press the accelerator pedal three times within 10 seconds. Turn the ignition off, and the service light should be reset when you turn the ignition back on. If the light remains on, you may need to repeat the process or consult the vehicle's manual for specific instructions.
If its due to you reaching your service interval, you can reset your service indicator by doing the following: - turn the ignition on - press the left button on the side of the speedometer two times to display the service interval indicator - when it appears, push and hold the left button, then while holding the button down turn the ignition off - now while holding the button down still turn the ignition on and hold the left button further for 10 seconds - release the button and this should now reset the service indicator If its not the service indicator and if you don't do the service with the above reset its not a good idea to do the above as it might make the next service level much higher and also can cause warranty issues if you don't get servicing done. The above is to allow people who service the smart outside of a smart dealership the chance to reset the indicator.
To reset the service light on a 2008 Mercedes-Benz C180 Kompressor, first, turn the ignition to the "on" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and start the engine to ensure the service light has been reset. If the light remains on, repeat the process.
normally disconnecting one of your battery terminals and reconnecting it will reset the trouble light.
First, turn on ignition and hold down right trip button while turning off ignition. Then, turn ignition back on and release right trip button. And then, turn left trip button to the right and release. Finally, turn off ignition. Service indicator should be reset when you next start the vehicle.
Beaverton Toyota, Oregon, provides a list of the steps to reset the service indicators for a variety of Toyota models, also Scion. Go to: How To Reset Maintenance Light ( http://www.beavertontoyota.com/service/tips.htm ) Find your make and year, and go to the list, thus ... --- "Reset Engine Oil Replacement Reminder Light" --- Find your model and follow the detailed steps. For 2008 Avalon, the list is at: http://www.beavertontoyota.com/service/pdf/08maintlight.pdf