To tighten the chain on a mini Baja clutch, first, ensure the vehicle is off and on a stable surface. Loosen the axle nuts and adjust the position of the rear axle to increase chain tension. Check the chain tension by pressing down in the middle; it should have about half an inch of play. Once the desired tension is achieved, retighten the axle nuts securely.
To fix the clutch on a Baja 97cc mini bike, first ensure the bike is turned off and cooled down. Remove the clutch cover and inspect the components for wear or damage, such as the clutch pads and springs. Replace any worn parts, clean the clutch assembly, and reassemble it carefully. Adjust the clutch cable tension if necessary to ensure proper engagement and disengagement.
Loosen the governor which is a screw behind the front chain cover. Search on YouTube,"How to make a Baja racer mini bike go faster."
The Baja Heat mini bike has a 200cc 6.5 Hp size engine.
You're chain is "stretched to far". Or you need to use a wrench to loosen two nuts and then use a wrench to move your back tire backward to tighten the chain. Then re-tighten the keeper nuts you loosened to begin with. As you tighten the chain make sure your tire is not going crooked. There should be visual notches near the bolts you are tightening to make sure your tire stays straight.
Homelite
A 2.8 = 97cc
Castroil
i will by it for 600,000,000 dollars
gas
No, it has manual gearchange, but no clutch.
Timing chain on the mini 2001-2006
yes