To turn off the service spanner light on a Citroën Berlingo, you typically need to reset the service indicator through the vehicle's dashboard. Turn the ignition on without starting the engine, then press the trip reset button until the service spanner icon starts flashing. Finally, keep holding the button until the icon goes off, indicating that the reset is complete. If the light persists, consult the vehicle's manual or a professional for further assistance.
smash the clocks out with a hammer
to get the spanner (or service me now) light off all you have to do is turn the ignition on while the engine is off and hold in the trip meter reset button for six seconds or so.
To reset the service spanner indicator on a 2003 Vauxhall Vectra 2.0 DTI, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal fully three times within five seconds. Then turn off the ignition. Upon restarting the vehicle, the service spanner light should be reset.
igntion off. press and hold down on the button on the dash. turn ignition on. and wait for the spanner to disappear. turn igntion off. don't be alarmed if the trip meter resets cos it will go back to normal when the spanner light is removed from the dash.
Take the fuse out.
To reset the service spanner on a 2002 Fiat Ducato 2.8cc, turn on the ignition without starting the engine. Press the gas pedal three times within ten seconds, then turn off the ignition. When you restart the engine, the service indicator should be reset. If it remains lit, repeat the process.
To reset the service spanner light on a Peugeot 206, you need to turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off and back on while continuing to hold the button. After a few seconds, the light should reset and turn off. Release the button, and the service light should be gone. If it persists, consult your vehicle manual or a professional for further assistance.
turn ignition to position 2..press brake and throttle together for 15 seconds..light will flash..release and switch off...done!
with ignition off hold done the button on the instrument cluster. turn ignition on. wait about 10 sec. the trip meter may reset but it will reappear to what it was before resetting the spanner symbol if done right. if done right. the spanner should dissappear.
If you mean the orange light showing oil can and spanner hold both foot brake and throttle, turn on ignition and hold for 30 seconds. The light will flash, turn off ignition job done.
To reset the spanner light on a Polo Vivo, first turn on the ignition without starting the engine. Press the gas pedal fully three times within 10 seconds. After that, turn off the ignition. The spanner light should reset, indicating that the service reminder has been cleared. If it doesn’t reset, consult your vehicle's manual or a professional mechanic for further assistance.
Switch ignition ON. Press the button on end of right hand stalk until spanner symbol flashes and the distance remaining to next service appears in the display. Press and hold the trip reset button for 10 secs until new service interval is displayed.let go of stalk. Turn ignition off.