0
What else can I help you with?
How do you replace fuel pump on a 1986 S10 pickup?
Drop the fuel tank or unbolt the bed and slide it back enough so you can access the pump.
Do you need to pull the motor to change the oil pan on a Ford F-350 with a 5.4 motor?
1. Unbolt engine mounts at the frame. 2. Raise motor about 2 inches. 3. Unbolt the pan and slide back. You will the have access to oil pickup tube. 4. Unbolt pickup tube, drop it in the pan and remove it.
How do you change the fuel pump on a 2008 silverado?
You will have to remove the fuel tank or unbolt the bed and slide it back far enough so you can access the pump.
How do you change fuel pump 2004 Chevy 3500?
You will have to drop the fuel tank or unbolt the bed and slide it back far enough so you can access the pump.
Where is the fuel pump on a 1993 Nissan pickup?
it is in the tank not bad to change remove 6 bolts from bed unplug tail light slide bed back change pump and put bed back
How do you take the tail lights off of a 1992 Nissan pickup?
If it is the same as the 1993 version, there will be screws/bolts in the back of the bed that you can unscrew/unbolt and u should be able to get at the tail-lights from there.
What is the meaning of slide caliper rule?
unbolt the caliper
Size of 2005 ford pickup bed?
A 2005 Ford pickup bed is about 5.6 foot long. This is a normal size bed not a long bed.
How do you change the fuel pump on 95 dodge ram?
It is best to remove the bed. Just unbolt and slide back a couple of feet. Don't forget to unhook filler neck. I have found this to be the simplest way.
How do you remove transmission from a 1989 Nissan 4 x4 pickup?
Remove the driveshafts, unbolt the transfer case, unbolt the transmission from the bell housing. Disconnect any sensors. If it's an automatic, Unbolt the torque converter.
Can you have riders in the bed of a pickup?
Never
How do you remove gas from gas tank when changing the fuel pump on a 1990 S-10 Pickup 2.5?
it is easiest to unbolt the bed (8 bolts) and use a cherry picker (engine hoist) to move the bed off, then you get perfect access to your tank, plus any exhaust work from there too!
