There are several techniques.
1. If very rusty clean what you can and then take a torch and heat until you you see it's getting slightly red. Then try to unscrew it right away.
2. If not very rusty use ATF or WD40 or similar sprays on it leave to penetrate for 10-20 minutes then try to unscrew.
And many other techniques but it depend on materials around bolts and also from a quality and material of bolts too.
you use a spanner to open a rusted nut bolt because you need a strong tool to open a rusted nut bolt.
Left intact the rusted bolt because it has the added mass of the Oxygen. Once cleaned up it will be lighter because it has lost mass in the form of iron atoms in the Iron Oxide molecules.
well I have.......... so it means you can
P(A) chance of being a bolt = 50/200=1/4 P(B) i.e chance of a rusted item ( i.e bolt or nuts) =100/200=1/2 P(AB) = P ( OF BEING RUSTED AND BOLT)= 25/200= 1/8 P(A or B) = the probability that it is rusted or a bolt. = P(A) + P(B) -P(AB)=0.25+0.5-0.125=0.625 51/200
I'm pretty sure you can't screw a NAIL. A screw maybe...
The easiest way is to unscrew the butt pad screws and see if they are rusted.
To effectively remove a rusted toilet bolt, you can try using penetrating oil to loosen the rust, then use a wrench or pliers to carefully turn and remove the bolt. If the bolt is still stuck, you may need to use a hacksaw to carefully cut through the bolt. Be sure to wear protective gloves and goggles while working on this task.
To effectively unscrew a tight bolt, use a wrench or socket that fits the bolt head snugly. Apply steady pressure in a counterclockwise direction while holding the bolt in place to prevent it from turning. You can also try using penetrating oil to help loosen the bolt.
To unscrew a bolt effectively, use the correct size wrench or socket to fit the bolt head, apply steady pressure in a counter-clockwise direction, and use lubricant if the bolt is stuck. Make sure to hold the wrench securely to prevent slipping and damaging the bolt or surrounding materials.
you unscrew th bolt
fry an egg or unscrew a bolt
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.