A mixture of epoxy resin thickened with as much Saltillo tile dust as possible, should be the consistency of peanut butter when ready to apply to the surface. Epoxy resin kits are available at marine or large hardware stores.
To age Saltillo tile, you can use a mixture of water and vinegar to create a patina. Apply the solution to the tile and let it sit for a while before rinsing. You can also try using a color-enhancing sealer to give the tiles an aged look.
depends on the kind of tile & the thickness & obviously the test method Ceramic or Saltillo will break much easier than Porcelain need more info
cost to remove tile floor
it depends on the size…but normally it would cost like 96¢ for a tile that would be the size of a 4 by 4 tile.
Saltillo tiles can be used for flooring but are very porous and not recommended for outdoor use or in cold damp climates. They need to be installed and sealed very carefully and looked after well to retain their appearance.
£167.97p
To apply boiled linseed oil on Saltillo Mexican tile, first ensure the surface is clean and dry. Use a clean, lint-free cloth or a brush to apply a thin, even coat of the oil, working it into the tile and grout. Allow the oil to penetrate for about 15-20 minutes, then wipe off any excess. Let the tile cure for at least 24 hours before walking on it or applying additional coats, if desired.
Asbestos tile is no longer manufactured in the United States. Asbestos tile contains asbestos, which was found to cause cancer if inhaled. Vinyl or ceramic tile is the better alternative.
For a professional to install marble tile in a 10 x 10 foot space, it will cost around 1,500 dollars. If you do it yourself, it will cost about $550 for the same amount of space.
I suppose it would be too much to expect you to say how much the tiles cost!
To refinish tile effectively and efficiently, follow these steps: Clean the tile surface thoroughly with a mild detergent and water. Sand the tile lightly to remove any existing finish or rough spots. Apply a bonding primer to help the new finish adhere to the tile. Use a high-quality paint or epoxy specifically designed for tile surfaces. Apply multiple thin coats of paint or epoxy, allowing each coat to dry completely before applying the next. Seal the refinished tile with a clear topcoat for added durability. Allow the tile to cure for the recommended time before using the surface.