between 5-7 psi,
If it is fuel injected or has a carburetor makes a difference.
You will need to check the fuel pressure, this can be done by a mechanics shop fairly cheap.
No
you probably need a fuel pressure regulator it should be around 35-45 psi
check fuse for fuel pump or may need a new fuel pressure regulator, its on the fuel rail.
CHECK THE FUEL PRESSURE, MAY NEED ELECTRIC FUEL PUMP REPLACED.
Need to check fuel pressure with a gauge first. Then check fuel pressure regulator. Need to check fuel pressure with a gauge first. Then check fuel pressure regulator. Need to check fuel pressure with a gauge first. Then check fuel pressure regulator. Need to check fuel pressure with a gauge first. Then check fuel pressure regulator.
To check the fuel pressure on a 2005 Ford Escape, you'll need a fuel pressure gauge. First, locate the fuel rail on the engine and find the Schrader valve, which looks like a tire valve. Remove the cap from the valve, then connect the fuel pressure gauge to it. Start the engine and observe the gauge reading; it should be within the specified range for proper fuel pressure, typically around 30-50 psi, depending on the engine type.
need more info what gauges?
Chevy did not use a reset button, Only ford used them. If you have no fuel pressure, then you need to check the fuel pump FUSE and RELAY.
you will need to hook a pressure gauge up to the fuel rail. If the correct pressure is not obtained then the pump is bad. If too much pressure then your fuel pressure regultor is not working. You will need to find out what the normal operating PSI range is for this pump first.
I believe all contours have a test connection similar to a tire stem connection that you can connect a fuel pressure tester to. You need to find the specification on fuel pressure.(depends on if it's a 2.0 4c or 2.5 v6) You will need to connect the tester, turn the ignition on and watch the fuel pressure tester gauge, and if it's losing too much pressure while engine is off(usually more than 5-10 psi) then that's a sign of a failing fuel pump.
You will need a fuel pressure gauge. Connect the gauge to the fuel rail and start the engine. The gauge will tell you how much pressure they pump is putting out.