To bury an air conditioning line to the compressor, first, dig a trench that is at least 12 inches deep to prevent damage. Use PVC or other suitable conduit to protect the line from moisture and physical damage. Ensure the line has a slight slope away from the compressor to facilitate drainage and prevent water accumulation. Finally, cover the trench with soil, compacting it to avoid settling over time.
The 2003 Chevrolet trailblazer air conditioning line can be found on the air conditioning compressor. The line goes from the compressor to the firewall. The line will go through the firewall to the air conditioner core.
The 1990 Mitsubishi does not have an air conditioning recharge line. The vehicle has an air conditioning recharge port. You can recharge your air conditioning system through the low pressure port on the air conditioning compressor.
air conditioning compressor
The suction line will be the larger line going into the compressor.
The 2002 Subaru air conditioning drain line can be found on the bottom of the air conditioner compressor. The air conditioning drain line routes condensation to the bottom of the engine compartment.
The air conditioning compressor fuse can be found in the fuse box. The air conditioning compressor fuse is actually a relay switch.
On the line right at the compressor.
Remove the air conditioning hoses from your 1997 Chevy Malibu air conditioning compressor. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install your new air conditioning compressor.
Larger line from A/C compressor is the low pressure line
Remove the belt from your Mercedes-Benz 240 air conditioning compressor. Remove the air conditioning hoses. Remove the compressor retaining bolts. Reverse the process to install your new air conditioning compressor.
The air conditioning compressor contactor controls the flow of electricity to the compressor unit, allowing it to turn on and off as needed to regulate the temperature in the air conditioning system.
look under your hood find your a/c compressor and trace your biggest line from the compressor to the port in that line.