answersLogoWhite

0

gas valve handle if it is long, turned with the length of the hande in line with the pipe is the ON position. with the length of the handle at a 90 Degree angle to the gas line is in the off position. NORMALY. If you intend on opening up your gas line. Don't do it. Get a pro.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do I safely turn off a gas valve?

To safely turn off a gas valve, locate the valve and turn it clockwise until it is fully closed. This will stop the flow of gas and prevent any potential hazards. It is important to only turn off the gas valve if you suspect a gas leak or if instructed to do so by a professional.


Does rotating a gas valve on an indoor fireplace counterclockwise open or close the gas line?

All gas fireplaces have to have a shut-off valve within 10' and that will turn so the key or the handle is parallel to leave gas on and perpendicular to turn gas off. The valve inside the fireplace turns but not indiscriminately. The inner valve will turn to the pilot setting and depress to light the pilot. Once the pilot os stable the knob will un-depress and turn to the On position. For a manual valve this will turn on the gas flow to the main burners. If using a switch or remote turning the valve to On leaves the fireplace valve in a Ready position so the switch or remote will turn on the gas.


How do I turn off the gas in my house?

To turn off the gas in your house, locate the main gas shut-off valve, typically found near the gas meter. Use a wrench to turn the valve clockwise until it is perpendicular to the gas pipe. This will shut off the gas supply to your house.


What is valve turning diagram?

Valve turning diagram is a diagram that shows how to turn on and off gas. This is known as a gas meter.


How can I change the gas valve on a water heater?

To change the gas valve on a water heater, first turn off the gas supply and water supply to the heater. Disconnect the gas line and remove the old gas valve. Install the new gas valve and reconnect the gas line. Finally, turn the gas and water supplies back on and test the water heater to ensure it is working properly.


How do I safely turn off the gas to my stove?

To safely turn off the gas to your stove, locate the gas shut-off valve behind the stove. Turn the valve clockwise to shut off the gas supply. If you smell gas or are unsure, leave the area immediately and contact your gas company for assistance.


What is the correct procedure for ensuring the gas valve is in the off position?

To ensure the gas valve is in the off position, turn the valve handle clockwise until it stops.


How do I turn off the gas to my house?

To turn off the gas to your house, locate the main gas shut-off valve, typically found near the gas meter. Use a wrench to turn the valve clockwise until it is fully closed. If you are unsure or unable to do this, contact your gas company for assistance.


How do I change the gas valve on a water heater?

To change the gas valve on a water heater, first turn off the gas supply and water heater. Disconnect the gas line and pilot tube from the old valve. Remove the old valve and install the new one in its place. Reconnect the gas line and pilot tube, then turn the gas supply and water heater back on.


A ball valve is used for what?

A ball valve is used to turn water , gas or oil on and off.


How can I safely turn off the gas supply to my house?

To safely turn off the gas supply to your house, locate the main gas shut-off valve, typically near the gas meter. Use a wrench to turn the valve clockwise until it is perpendicular to the gas pipe. This will shut off the gas supply to your house.


How do I turn off the gas to my stove?

To turn off the gas to your stove, locate the gas shut-off valve behind the stove and turn it clockwise until it is fully closed.