0
What else can I help you with?
Do you need an alignment after front strut replacement?
It is a good idea to get a front end alignment after replacing and part of the front suspention.
When is a car alignment needed?
Assuming that one is referring to a front wheel alignment, there are a number of signs that can indicate that this process is required. If the car has driven over 100,000 miles since the last alignment, the front tires are wearing unevenly, the front of the car shakes when driving on a smooth surface, or the car is pulling to one side, a front wheel alignment is probably needed.
How do you know if your tires need balanced vs a front end alignment?
A alignment is needed if its pulling to one side. Where as a balance is needed if the car is viberating.
What is a damper in automobile?
The "balancer" mounted to the front of the crankshaft is also called a vibration damper.
How often to get front end alignment?
Every 5 years, or as needed like when it pulls to the side.
How do you change a strut in a 1999 Buick regal?
If like the 99 PA, then either front or rear replacement requires an alignment afterwards.
Can a two Wheel alignment be done on a 1999 town and country after a tie rod replacement or does it have to be a four wheel alignment?
depends how far the camber and toe is out on the rear. rear requires shims the front toe and camber can be adjusted in front just have it aligned
Estimate to replace front bumper of 2006 BMW?
My 330i front bumper needed replacement and it was estimated at 862.45
Is alignment necessary after replacing control arms and bushings?
Yes, generally after any major work on a front end a re-alignment is neccessary. Replacement of bushings and control arms could be considered major work.
How to do a front end alignment to 2002 trailblazer?
see a front end alignment mechanic.
How do remove and replace a strut on a 97 Nissan Sentra GXE?
Honda calls it a damper. If you want the front damper. Remove the brake hose clamps from the damper remove the damper pinch bolt (on the bottom). Remove the damper fork bolt. then remove the damper by removing the two 10 mm nuts on top. Do not try to Disassemble the Damper without a spring compressor.
What Tools needed front brake replacement 2005 kia sorento?
09581-11000 to compress the piston
