if a 6.0 diesel might be a high pressure oil leak. Need more info year, engine size etc.
must be added
There are 2.5 quarts in 2 quarts 8 ounces. Since there are 32 ounces in a quart, converting the 8 ounces into quarts gives you 0.25 quarts, which added to 2 quarts equals 2.5 quarts.
To find out how many quarts of water must be added, we first calculate the amount of pure substance in the 80 percent mixture. In 4 quarts of an 80 percent mixture, there are 3.2 quarts of the substance (0.8 x 4). Let ( x ) be the amount of water added. The total volume after adding water will be ( 4 + x ) quarts, and we want this to equal a 50 percent concentration, which gives the equation ( 3.2 = 0.5(4 + x) ). Solving for ( x ) gives ( 3.2 = 2 + 0.5x ), resulting in ( 0.5x = 1.2 ), or ( x = 2.4 ). Therefore, 2.4 quarts of water must be added.
You need 1 1/3 quarts of pure antifreeze.
There are things called arm cycles, which basically are wheel chairs with a bicycle drivetrain added to them, with the cranks being turned by the arms.
The original solution has 3.6 quarts of antifreeze in it. The equation then becomes (3.6 + x)/(12 + x) = 0.40, where x is the amount of antifreeze added. X is then equal to 2.
To find out how many quarts of pure antifreeze must be added to 6 quarts of a 10% antifreeze solution to obtain a 20% solution, we can set up the equation. The initial amount of antifreeze in the solution is (0.10 \times 6 = 0.6) quarts. Let (x) be the amount of pure antifreeze to add. The final solution will be (6 + x) quarts, and we need the total antifreeze to equal (0.20(6 + x)). Setting up the equation (0.6 + x = 0.20(6 + x)) and solving gives (x = 1.2) quarts. Thus, 1.2 quarts of pure antifreeze must be added.
The Econoline 150 (E-150) manual lists a six cylinder engine, and many eight cylinder engines. They all use 5 quarts of oil in the pan. One additional quart must be added if an oil filter is used. Since every automobile has an oil filter then six quarts of oil should be purchased and used for all the E-150 engines including the 5.8 liter (351 cubic inch) engine.
As a strong acid is added slowly to a strong alkali, the pH will gradually decrease due to the neutralization reaction. Initially, the pH will increase as the alkali is added, then start to decrease as the acid is added until it reaches a neutral pH of 7 when the acid and alkali are fully neutralized.
It's 1/4 cup Barbicide to a quart of water...so, five cups in 20 quarts.
25-26 pints of Transmission Fluid Check level with engine running and oil warm. the dry capacity is 7 quarts in the transmission itself. a truck tranny pan can and filter can be added to any car, and it adds an additional 2 quarts. the converter, varies by engine. convertor diameter vs capacity ( quarts ) 10" = 3 quarts 11" = 3.5 quarts 12" = 4 quarts 13" = 5 quarts
An 89 Cutlass Ciera holds 7.4 quarts of transmission fluid. When servicing the vehicle, a portion of the fluid remains in the transmission and will not be added back.