The VR8200C 305 Honeywell gas valve can often be replaced with compatible models such as the Honeywell VR8200C 404 or VR8200C 502, depending on the specific application and system requirements. It's crucial to ensure that the replacement valve matches the specifications of the original, including input rating, pressure settings, and electrical connections. Always consult the manufacturer’s guidelines or a qualified technician to confirm compatibility before making a substitution.
If you are asking if you can substitute a 350 for a 305, the answer is generally yes.
The intake valve is bigger.
It is in the valve cover.
valve cover with a vaccum hose going to the throttle body
it depends if you have a 305 or 305ho , 305 8:1 compression cupped cylinders 305ho has 9:1 compression with valve cut pistons
On a 1986 Chevy 305 engine, the Positive Crankcase Ventilation (PCV) valve is typically located on the valve cover. It is usually found on the driver's side valve cover, fitting into a grommet. The valve connects to the intake manifold via a hose, allowing for the circulation of gases from the crankcase to the intake for combustion.
Yes, but I don't know why you would want to use them on a 350. 305's are limited as far as valve size is concerned because their small bore causes clearance problems with the large valve heads... Larger valves will actually hit the block on a 305. Just about ANY 350 head is better than ANY 305 heads.
Yes, You can put a manual shift valve body in it.
in the back of the intake maniford on the passenger side
Follow the recommendations from the cam manufacturer.
non-return check valve
For the 305 (LO3), the PCV valve is located on the driver's side valve cover. It's held in place with a rubber grommet.