0
What else can I help you with?
Average cost to strip and wax vct floors?
Stripping and waxing VCT can cost anywhere between 20-30 cents per square foot depending on the condition of the floor. To scrub and recoat costs about 15-20 cents per square foot.
How to strip and wax vct floors?
Go to youtube & there are tons of how to videos.
What is the cost to strip seal and wax vct tile floors?
The cost to strip, seal, and wax VCT (Vinyl Composition Tile) floors typically ranges from $0.50 to $2.00 per square foot, depending on factors such as the size of the area, the condition of the floors, and regional labor rates. Additional expenses may arise from the need for specialized cleaning products or equipment. It's advisable to obtain quotes from local cleaning services to get a more accurate estimate tailored to your specific needs.
What is the average Sq FT cost to strip and wax VCT tile floors?
it is 2012 house cost and food are up! People I charge 2.00 a sqft and get it!
Average cost to sweep scrub and burnish vct floors?
On the low end at about $.30 per sq ft & the top operators will be $.50 or better a foot after they do all the add ins. Get it in writing. Never pay for it all upfront.
Is it good to put wood floors on top of tile?
You can put the newer style floating wood floors onto a floor with tile. Also, if it is old VCT tile, there are glues that will allow you to use their product to glue the wood to the floor. Unfortunately, nail down wood is not acceptable.
What is the average cost to install luan for the vct tile?
The cost to lay down a luan sub floor is $15 per sheet, and this would include the material.
Can you wax tile floors?
If its new VCT probably, and you will need to strip the old wax & rinse good so there is no stripper residue.. it eats your new wax over time.... If it ceramic tiles NO.
What does TI VCT stand for?
twin-indepedent variable cam timing (Ti-VCT)
Can you install vct tile over vct tile?
Yes you can install vct over existing vct. The existing vct must be well adhered to the subfloor, no loose tiles or cracked and chipped tiles. If tiles are missing or must be removed you will need to patch in those spots with a suitable portland cement leveler or new pieces of vct. You will need to sand off the wax layer that may be present on the existing vct because if it is left on it can wear loose over time causing adhesion failure of the new vct and glue. Sweep all dust and contaminants from the floor.
What does vct stand for?
check your answer
What does VCT stands?
check your answer
