check fuses then check all the bulbs, then check the turn signal switch the brake lights work through it
How do you replace brake lights
my daughters 1991 miusbishi montero has no break lights , turn signals or hasard lights . All tail lights and front markers are working. All fuses are cking good and all bulbs are good..Is my blinker switch bad ? capri
It depends on the vehicle but in general you would have one fuse for the signals and one fuse for the brake lights.
Break lights come on when you step on the break, they do not come on when the head lights are turned on.
Brake lights
Fuse 7 controls the brake lights. It should be a red 10amp fuse.
You have a short, you also may have to check your bulbs i found on one of my blinkers the bulb was faulty, i replaced it and everything was all fine again.
It is not necessarily the fuse. It could be the switch on the brake that is not closing the circuit.
Could be the brake light switch or fuse.
Blown fuse
Brake lights and turn signals are on a separate circuit from the tail lights. Tail lights are on the same circuit with the dashboard lights. If the dashboard lights aren't working either, check the fuse. If they ARE working, check the headlight switch.
i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs