answersLogoWhite

0

The charging system is or has failed. Have it tested at your local auto parts store at no cost.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

For a low voltage light fixture can you use a 2-pole on-off-on switch on a center tapped secondary and leave the primary always hot?

Please clarify what you mean by low voltage light fixture. What voltage?


What if your alternator light remains on what does this mean?

The charging system output voltage is too high or low.


Can you put low voltage sound wires and low voltage light wires in the same conduit?

noyou can not


What does it mean when volt light is on?

The voltage light coming on indicates a problem. The system has determined that the voltage has become either too high or too low. This is most commonly a bad alternator or regulator.


What voltage would a low voltage light bulb generally have?

24 volts


Low Voltage Lighting ?

form_title= Low Voltage Lighting form_header= Create the lighting you want with low voltage light. Where are you installing low voltage lighting?*= _ [50] Will you be installing the lighting yourself?*= () Yes () No What is your lighting budget?*= _ [50]


What does the warning light that is a box with a positive and negative like a battery mean?

Charging system voltage is too high or to low.


Why does a low voltage circuit create more amperage than a high voltage circuit?

That depends on what you mean. If you mean why does a circuit which has a high voltage side and a low voltage side have a greater average current on the low voltage side, it is probably because of power conservation: P = IV. If this is not what you mean, you will have to be more specific!


What does it mean a battery light come on in your Jeep liberty dashboard?

The output voltage from the alternator is either too low or too high.


What does gen light mean?

If your GEN light is on then the generator votage has reduced down to an extreme low rate or it has died completely, as in, it isn't putting out voltage to recharge the battery.


Will a low voltage light work on 50 volts of power?

The input voltage must match (within a few percent) the rated voltage of the light. If you're using a 12 volt light, a 50 volt supply will destroy it within seconds. "low voltage" is not sufficient information to help you answer your question.


What types of construction lights are available?

The types of construction lights that are available are high voltage beam light and a low voltage beam light. The high voltage beam light shines a lot brighter.