0
You need a good jack to raise the car and a lug wrench or spider wrench to get the nuts off and on again.
In some cases you may need a pry bar or mallet to get the wheel loose from the hub after the lug nuts are removed. Some modern cars have a very tight fit between the centering hole in the wheel and the spindle hub.
What else can I help you with?
What tools are required to change a bike tire?
To change a bike tire, you will need a set of tire levers, a new inner tube, a bike pump, and possibly a wrench or multitool to remove the wheel.
What you need to change a tire?
To change an actual tire you need a tire machine to get it off the rim and the new one on. -If you mean the change the WHEEL and tire on a car, then you just need a jack and a tire wrench.
Where can you buy tire tools?
Tire Tools can be bought from Canadian Tire, Walmart, Babcot Tools, Ken Tool Direct, Myers Tire Supply, Tire Rack, No Scuff Tire Tools and Steel Man Tools.
How quickly can you change a tire?
The time it takes to change a tire can vary depending on experience and tools available, but typically it can be done in about 15 to 30 minutes.
How can a car tire be changed?
Car tires are not too difficult to change, if you know what you are doing and have the proper tools. You will need a jack and a tire iron. Most cars come with the proper equipment for changing a tire. Many also have instructions included with the jack.
How do you install a spare tire bracket on a 1995 Chevy Corvette?
you just need the right tools and the spare tire.
What tools do you need to change a power steering pump in a 92 Grand Prix 3.1 liter V6?
if you need to know what tools you need you should not be doing this yourself tools you need should be self explanitory when you need to take off a screw, you need to look at the screw driver to match it when you take off a bolt, you match the wrench size with the bolt... take it one step at a time and go to crappy tire *cough* Canadian tire and pick a haynes manual for $20 shows you detailed pictures as well as detailed instructions.. as well as tools needed
Do you need a special tool to change the tire on the Pontiac vibe?
Yes, you will need a few special tools to change a tire on a Pontiac Vibe, including a jack to lift the vehicle and a lug wrench to remove the lug nuts. Additionally, having a spare tire and wheel chocks for safety is recommended. Make sure to consult the owner's manual for any specific instructions regarding your model.
What type of wrench do you need to change the brake pads on an 01 durango?
There are several tools you will need to change the brake pads on your 2001 Dodge Durango. You will need a 9/16 socket wrench. You will need a screwdriver. You will need a needle nose pliers. You will need a lug wrench to remove the tire and wheel.
How do you lower spare tire on a GMC Yukon when it fails?
To lower the spare tire you need to some tools and a jack. There is a cable winch holding the spare in place, so you will have to loosen it using your tools.
What equipment's are needed for Tire Repair from the Tire Repair Shop?
The equipment needed for tire repaired varies from job to job, you would need tools to take the tire off and also sealants and other devices for repair of tire.
What tools do you need to change radiator?
wrench
