go to OBD codes.com they have them for everything sandi
You may want to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
Read the codes. Then fix the problem. Autozone will read the codes for you for free.
To get the computer codes you press the "Off" and Warm" buttons on the A/C unit at the same time.
Have vehicle scanned to determine the problem and have codes cleared
The 1972 Oldsmobile Cutlass 442 had several engine options, each identified by specific codes. The primary engines included the 350 cubic inch V8 with the code "H," the 455 cubic inch V8 with the code "W," and the high-performance version of the 455, known as the "X" code. These codes helped distinguish between different engine specifications and performance levels in the Cutlass 442 lineup.
get a code scanner, or borrow one from a parts store, plug it in and clear codes
Not knowing what the following codes are will not allow someone to know which indicate an Oldsmobile 88. Information should be provided as to what the codes are.
the code is 93kj
To read trouble codes in a 1991 Oldsmobile Ninety-Eight, you need to locate the diagnostic connector, typically found under the dashboard near the steering column. Use a jumper wire to connect terminals A and B of the ALDL (Assembly Line Diagnostic Link) connector. Then, turn the ignition key to the "On" position without starting the engine; the check engine light will blink the trouble codes in a series of flashes. Count the flashes to interpret the codes, which can be referenced in a repair manual for further diagnosis.
Have vehicle scanned to see if any codes are stored to determine the problem
looking for the car code for a ninety eight 1989 oldsmobile
http://www.modifiedlife.com/2001-oldsmobile-aurora-car-stereo-wiring-schematic/