answersLogoWhite

0

What else can I help you with?

Related Questions

Where is the coolant drain plug on 2002 Volvo?

Low side of the radiator.


How do you drain the oil in an 89 Volvo 240 dl?

1" Wrench or socket on the bottom of the pan.


How change the coolant sensor on a Volvo 240 dl?

it's on the radiator, just pull the wires and unscrew it.


How do you drain the coolant in a 2004 Volvo S60?

To drain the coolant in a 2004 Volvo S60, first ensure the engine is cool, then locate the radiator drain plug at the bottom of the radiator and place a container underneath to catch the coolant. Open the drain plug and allow the coolant to flow out completely. Additionally, you may want to remove the radiator cap to help facilitate drainage. Once drained, close the drain plug and refill with the appropriate coolant mixture.


How do you change the radiator on a 96 Volvo 850?

To change the radiator on a 1996 Volvo 850, first, ensure the engine is cool and disconnect the battery. Drain the coolant by removing the drain plug at the bottom of the radiator. Next, detach the hoses from the radiator and remove any mounting bolts or clips securing it in place. Finally, install the new radiator, reconnect the hoses, refill the coolant, and reconnect the battery.


Where is coolant drain plug on 1999 Volvo vn truck?

Should be on the low side of the lower radiator hose.


How do you replace a radiator in a 1994 Volvo 940?

To replace the radiator in a 1994 Volvo 940, first, ensure the engine is cool and disconnect the battery. Drain the coolant by removing the drain plug at the bottom of the radiator and disconnect the upper and lower radiator hoses. Remove any mounting bolts and the fan shroud if necessary, then lift out the old radiator. Install the new radiator by reversing the removal steps, reconnect the hoses, refill the coolant, and check for leaks.


How do you remove the radiator from a 2001 Volvo s40?

To remove the radiator from a 2001 Volvo S40, first ensure the engine is cool and disconnect the battery. Drain the coolant by removing the drain plug at the bottom of the radiator, then disconnect the upper and lower radiator hoses. Next, unbolt the radiator from its mounting brackets, disconnect any electrical connectors, and carefully lift the radiator out of the engine bay. Make sure to check for any remaining coolant in the system before finalizing the removal.


What is the firing order for a 1988 Volvo 240?

1 3 4 2 with number 1 cylinder being at the radiator end of the engine.


What is the size of a 1990 Volvo 240 oil drain plug?

The oil drain plug size for a 1990 Volvo 240 is typically 13mm or 1/2 inch. It's important to use the correct size socket or wrench to avoid damaging the plug. Always check the vehicle's manual or specifications for confirmation, as variations may exist.


Would a 1987 Volvo 240 hatch fit a 1991 Volvo 240?

long answer: yes


Volvo 240 fuse?

Yes the 240 does have fuses. Was that your ?.