Which gear turns faster if both driving and driven gear are the same?

Do bigger wheels roll faster then smaller wheels?

NO. The smaller the wheel the more revolutions it turns if both are driven at the same speed. So, the smaller the wheel the faster it turns.

If driving wheel and driven wheel of gear system are of same size which will more faster?

Gears are used to transfer force from one wheel to another. When gears are of the same size then driving gear will move faster as force is being applied on

If a 8 cm and a 12 cm wheel were to be applied to an individual point where which they were both driven by the same motor which would go faster ie make the car go faster?

depends whos driving. ie the stig would go faster than you

If the driving wheel and the driven wheel of a gear system are of the same size which gear will move faster?

The driving wheel will move faster because some energy is always lost in energy transfer.

What do victor and his monster have in common?

Both are driving to game types of recognition Frankenstein wants fame and the monster wants affection

Why gear with less number of teeth has poor strength?

It depends if the gear is driving or being driven. A large gear pulling a smaller one gives speed, while a small gear pulling a larger one gives power. The reason has to do with the number of times they turn in relation to each other. That is also known as the gear ratio. For instance, if a gear has to turn a gear that's ten times it's size, the drive gear has to turn ten times before the output gear turns once, thus converting speed to power. However, a gear driving a gear that is 1/10 its size means that the driven gear would get to turn ten times for each time the driving gear turns, thus converting power to speed. In practical usage, keep in mind that older manual transmissions were made to where all the forward arrangements but the 4th gear were made to where the driving gear (the one connected most directly to the crank shaft of the engine) is smaller than the driven gear. So in the first three gears, the engine turned faster than the drive shaft. In those transmissions, 4th gear usually had both gears in that set the same size so the drive shaft is turning at the speed of the engine, Then once automakers began to add overdrive, that meant that 5 and higher gears were paired to where the driving gear (engine side) is larger than the driven gear (drive shaft side) to allow the drive shaft to turn faster than the engine.

What pulley turns faster?

The pulley with the smaller diameter will turn faster than the pulley with the larger diameter, assuming both are connected by a belt or chain. This is due to the relationship between the rotational speeds and the circumferences of the pulleys.

Is gear a force multiplier or a speed multiplier?

Both. A small driving gear and a large driven gear is a force multiplier. Whilst a large driving gear and a small driven gear is a speed multiplier

What automotive tires should I buy for off-road driving?

For off road driving you should look for tires designed to be used off road such as those made buy BF Goodrich. For light off road driving tires with a LT designation would be best suited as they can be driven both on and off road.

Are the writers in Korea are materially driven artistically driven or both.?

like everywhere else, it depends on the writer.

What would cause gauges in 1989 ford aerostar to read hot and to discharge?

If are driving when this happens, it is usually due to a broken fan belt...this belt turns both your water pump & alternator...

Is Firefox faster than safari?

they both are both about the same