Most newer fuel injected vehicles have a idle control valve or idle speed motor or a variation of one. A idle speed motor controls the idle speed but when they are defective, they can allow a lean mixture which can cause a very rough idle. WRONG! A malfunctioning iac will NOT effect your fuel mixture. Your misfire problem is likely one of five things. Bad injector, bad spark plug, bad spark plug wire, bad egr, or bad egr control valve. If the problem is ignition related it usually gets worse as engine load is increased. A dirty injector can cause issues across the load range. A bad egr or egr control valve will be worse at low engine loads. The control valve is strapped on the side of the intake tube from the airfilter box to the throttle body. Find the hose going from that to the egr valve itself and unhook it. If the idle improves, you have a bad egr control valve. If idle does not improve, chech the other items (egr valve, plugs, wires, injectors).
check the vaccums lines like the PVC valve to see if the hoses are cracked and need to be replaced or not.
The ac could be causing the problem. Turn the ac off, and watch the compressor clutch to see if it is not engaged. If it is then the compressor or clutch could be bogging the engine down.
No, Chrysler stopped Plymouth production in 2001.
when mine was doin that i cleaned the tank and let it sit for a couple days and changed the fuel filter which was stopped up. metal fuel tanks need to cleaned or replaced if any rust is visible...and fuel filters to....
As of 26/6/10, no, it has not been stopped.
The harpsichord was replaced by the piano.
it stopped airing in 2001 because it was replaced by nickelodeon replaced it with tiny toons
drill the lock out
No. The Caliber was stopped in 2012 and replaced by the Dodge Dart.
The wonderful thing about a river is that is is always getting a fresh supply of clean water. The mess needs to be cleaned up by people, the source of the contamination needs to be stopped, and all will be well.
Nikon stopped producing the D80 in August 2008 as it was replaced by the D90 :)
your throttle body could be sticking i'd start by cleaning that