If the speed sensor has no input,the ABS light will come on.Check your speed sensor first. The 4X4 sometimes has 2 sensors one on the transfer case and one on the tail shaft. on my truck the tail shaft sensor was not used , so when the transfer case sensor failed,I hooked up the tail shaft sensor and everything went back to normal.
Possible abs sensor failure.
because your car is broken
make sure FUSE is good- make sure there is 12 Volts on both side of the Brake Light Switch- the brake light wires run THROUGH the steering column-Make sure 12 Volts are on the in & out brake wires.ASSUMING that BOTH bulbs are good & have good GROUNDS.
Is your speedometer not working? If your abs light or tracs light is on it may be the brake control module causing your speedo not to work.
Check the brake fluid reservoir, with some vehicles they share the low fluid light and the e-brake light.
yes itll say bulb failure on the dash by the speedometer
Defective brake light switch.
This light comes on to tell you that you must depress the brake pedal to shift from park.
You might want to check the brake light bulbs on both sides to make sure the are in correctly and clean sockets.
Check the fuses, check the brake light switch, check the bulbs.
that means your brake fluid is low
Problem with the ABS, take it to a pro.