answersLogoWhite

0

Weight readings are not matched with the calibration value in the memories ( Spin incorrect way, machine unstable while readings, faulty analog section in the main board or CPU...).

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How Do You Calibrate A Balco b 996 Wheel Balancer?

To calibrate a Balco B 996 wheel balancer, first ensure the machine is level and on a stable surface. Next, run a self-test by following the manufacturer's instructions, usually involving selecting a calibration mode. Place a known weight on the balancer's spindle and adjust the settings until the displayed measurements match the known weight. Finally, check the calibration with additional weights to confirm accuracy before normal operation.


Where to place weights on wheel?

you need a wheel balancer for that


What does code lp6 lo mean for a fmc 4100 spin balancer?

Directly, it means one of the force sensors is reading low. I think the left one. But, on my 4100 balancer, i had an issue with the angular position sensor (the encoder wheel) which for some reason gave me the same error.


How do you replace the harmonic balancer on a 1993 buick cenyury?

You will need to go through the passenger front wheel well (wheel off). Remove belt, remove pulley/balancer with a balancer puller tool. Air tools make this job MUCH easier.


Has anyone heard of a fmc wheel balancer series 7?

Is made by snap on and is usually a john bean balancer with FMC name on it


After i calibrate my fmc 5800 wheel balancer. it comes up RPG lo it wont run why help?

when i calibrate my FMC wheel balancer i only get cal o not cal good at the end


Where can hunter wheel balancer parts?

Hunter wheel balancer parts can be found by doing a simple key word search of the specific balancer online. You may also be able to find a second hand dealer locally that caters to mechanics needing parts and sells parts wholesale.


Where is the sensor on FMC 4100 wheel balancer?

The sensor on the FMC 4100 wheel balancer is typically located at the base of the machine, near the wheel assembly. It is designed to detect the imbalance in the wheel by measuring vibrations as the wheel rotates. This information is then used to determine the necessary weight placements for proper balancing. For specific details, refer to the user manual or manufacturer's documentation.


Where can you find a transformer for a Nortron 7300 wheel balancer?

Call 502 5538210 we have a spare transformer for 190.00


What does code lpg lo mean on a computerized wheel balancer?

It is low of Liguified petroleum gas, top it up


Crankshaft Pully removal on a 350 Chevy motor?

If your refuring to the harmonic balancer use a good steering wheel puller!!!!


How do you calibrate a nortron 7402-116 wheel balancer?

To calibrate a Nortron 7402-116 wheel balancer, first ensure that the machine is on a level surface and powered on. Next, select the calibration mode using the machine's control panel, then follow the prompts to input the required parameters, which may include wheel size and weight. Place a test weight on the balancer as instructed, and allow the machine to perform the calibration process. Once complete, confirm that the displayed values are accurate and adjust if necessary, following the manufacturer's guidelines.