0
What else can I help you with?
Where is the PCV valve on a vortec v6?
Passenger valve cover up to 95 vortec 4.3 and drivers side valve cover 96 and later vortec 4.3 plastic hose going to the top of it on either version.
Where is the PCV valve located on a 2002 Chevy s-10?
if it is a 4.3l vortec it is on drivers side valve cover
What might cause a 4.3 vortec to misfire on 6?
burnt valve...
Is a 1989 Chevrolet 350 a vortec motor?
I know on my vortec engine the valve cover bolts are in the center of the cover and there is only 4, my racecar has vortec heads and my truck has standard stock heads with four bolts on thew corners
How much torque for a 97 Chevy Z71 350 vortec engine?
how much torque for a Chevy Z71 350 vortec engine valve cover
Does the 2002 Chevrolet Silverado 5.3L engine have a PCV valve?
look om the passengers back side of the valve cover. You need to take off the vortec cover.
What is the procedure for valve adjustment on a vortec 350?
how do you set valve on 1998 350 vortec
5.7 vortec valve adjustment procedure?
5.7 later valve adjustment procedure begins with the removal of the valve cover. Each valve has an adjustment screw. The screws can be turned to adjust the valves.
Where is the PCV valve located on a vortec 4200?
The PCV (Positive Crankcase Ventilation) valve on a Vortec 4200 engine is located on the valve cover, typically on the driver's side. It is usually integrated into a grommet or fitting that can be easily accessed for replacement or inspection. To reach it, you may need to remove any obstructing components, such as the engine cover or intake ducting.
Where is the PCV valve on a 2003 Chevy Avalanche 5.3?
The PCV valve is on top rear of the engine, under the vortec cover. You must take the cover off to get to it, I believe it is an 8MM socket. However, (at least on mine) the valve is not replaceable.
What is the valve cover torque specification for a suzuki side kick?
I think there is no torque required for the valve cover as long as all are evenly tightened or the seal is flat on the cylinder head it will not cause any leak. If you have tightened the valve cover screws already and there are still leaks you might want to consider putting silicone on the valve cover gasket before you attach it or you might want to consider buying a new valve cover gasket.
Would valve cover leak cause the car to stall?
I would not expect a valve cover leak to cause a car to stall. A valve cover leak can fill the spark plug area with oil which can cause rough running.
