answersLogoWhite

0

Installing Wall-to-Wall Carpet

One of the most affordable and effective ways to drastically improve the condition and appearance of a room in a home would be to install new wall to wall carpet. While it can improve the appearance of the room, installing wall to wall carpet can be a complicated process. As opposed to paying the installation fees, all people should follow a few different tips when installing wall to wall carpet in their homes.

When installing new carpet in your home, the first thing that you need to do is measure the floor space. Be sure to measure the size of the room at least twice to ensure that you order enough carpet. Once you are confident that you know how large the room truly is, you should be sure order at least 10% more carpet than the actual square footage of the room. This will ensure that you have enough carpet in the event that you make a wrong cut or damage some of the carpet during installation.

Another tip for installing wall to wall carpet is to not skip the padding under the carpet. To save money and time, many people will naturally try to skip the installation of the under carpet padding. While this could save money and time, not having the padding under the carpet will eventually cause the carpeting to wear down, which will ruin the appearance of the overall room.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What are the best practices for installing tack strips when laying down new carpet?

When installing new carpet, it is important to follow these best practices for installing tack strips: Ensure the tack strips are placed around the perimeter of the room, leaving a small gap between the strip and the wall. Use a hammer to secure the tack strips to the floor, making sure they are straight and evenly spaced. Stretch the carpet tightly over the tack strips and use a knee kicker to secure it in place. Trim any excess carpet and tuck it under the baseboard for a clean finish.


What is the recommended distance apart for studs when installing a new wall?

The recommended distance apart for studs when installing a new wall is typically 16 inches on center.


How far should a toilet flange be from the wall when installing a new toilet?

The toilet flange should be about 12 inches away from the wall when installing a new toilet.


How far should the toilet flange be from the wall when installing a new toilet?

The toilet flange should be about 12 inches away from the wall when installing a new toilet.


Are there any new wall to wall carpets that do not smell?

If you are worried about "off gasing" I would recommend using a wool carpet with a jute backing. Its pretty much the most natural carpet you will find.


Can new carpet be glued to existing carpet on stairs?

No. Carpet that is to be glued down must have a clean, smooth and sound surface prior to installation. It is necessary to remove the existing carpet before installing the new. Scrape away any old adhesives best as possible, vacuum, use a premimum adhesive or contact adhesive, and press the new carpet into the adhesive to get a good transfer.


Where can tips on beginner investing be found?

Tips on beginner investing can be found in the Wall Street Journal newspaper. It has a page cite for the new investor as well as tips on which stocks will peak at their highest bond rate.


Carpet Installation?

form_title=Install Carpet form_header=7263 Please specify what kind of carpet installation this is.*= () Replace existing carpet () Remodel/Addition () Replace other kind of flooring () New Construction I hope you have purchased the carpet needed for this project.*= () Yes () No In which rooms/areas will the carpet be installed?*= [] Bedroom(s) [] Entry or hallway [] Dining room [] Family or living room [] Kitchen [] Basement Is this need emergency in nature?*= () No () Yes


How can I effectively remove carpet from my floor?

To effectively remove carpet from your floor, start by cutting the carpet into manageable sections, then pull it up along with the padding underneath. Use a carpet knife or utility knife to cut the carpet, and a pry bar or pliers to pull it up. Be careful of any tack strips or staples that may be holding the carpet in place. Dispose of the old carpet properly and clean the floor thoroughly before installing new flooring.


Where can one find a guide on installing a wall mount for a plasma television?

If someone wants a guide for installing a plasma television wall mount then it is worth checking the box of the television if it is new. Sometimes the instructions provided include such information. Otherwise a check on YouTube will give guidance.


How should I prepare my house for new carpet installation?

I am getting new carpet installed, what should I do to prepare myself for new carpet installation? What should I do to have my house ready for new carpet installation?


Has your cat peed on your new carpet?

No, my cat has not peed on my new carpet.