length*breadth*depth of the structure=...........m3 of concrete is needed. .
Well, isn't that a lovely question! To calculate the amount of concrete needed for a slab, you'll need to consider the thickness of the slab. On average, for a 10cm thick slab, you would need about 0.8 cubic meters of concrete for 8 square meters. Just remember to always double-check your calculations and enjoy the process of creating something beautiful!
To calculate the amount of concrete needed for a 12x30 slab, you first determine the area by multiplying the length (30 feet) by the width (12 feet), which equals 360 square feet. If the slab is to be 4 inches thick, convert the thickness to feet (4 inches = 1/3 feet) and then calculate the volume: 360 square feet x 1/3 feet = 120 cubic feet. Since there are 27 cubic feet in a cubic yard, divide 120 by 27 to find that approximately 4.44 cubic yards of concrete is needed.
Forty five 80 pound bags of cement are needed to make one cubic yard of concrete.
its about 12x5x67 respectively
First, things are not made of cement- they are made of concrete- which consists of cement, sand, gravel and water. Mix them using 1 part cement, 1.5 parts sand, 3 parts gravel. To calculate how much CONCRETE you need, multiply depth X width X length in inches, then divide by 1728. This will tell you the number of cubic FEET of concrete. To get the number of cubic YARDS, divide the cubic feet by 27. If you are using packaged concrete mix (Sakrete is one) then an 80 lb bag makes 0.6 cubic feet of concrete. NOTE: If you are working with concrete for the first time- do not add too much water (weakens the concrete) and do not get wet concrete on bare skin- it will cause a chemical burn. Wash it off promptly if you do.
To calculate the amount of concrete needed for a project, you need to determine the volume of the area to be filled with concrete. This can be done by multiplying the length, width, and height of the area. Once you have the volume, you can then calculate the amount of concrete needed by dividing the volume by the coverage area of one cubic yard of concrete. This will give you the total number of cubic yards of concrete needed for the project.
How thick? Gotta have thickness to calculate cubic yards.
The depth of the pour would also be necessary to calculate the volume of concrete needed.
Length in ft x Width in ft. x depth in ft. = Cubic feet, divide by 27 to get yards of concrete needed.
how calculate steel in concrete
You need several quantities to calculate concrete volume for corrugated metal decking. You need both the flute height in inches, flute width in inches, flute foot in inches, sealant depth or thickness in inches, gap size in inches, and deck length in feet.
To measure how much concrete you need for your project, calculate the volume of the area to be filled with concrete by multiplying the length, width, and height. Then, divide the total volume by the yield of the concrete mix to determine the amount needed in cubic yards or cubic meters.
Typically, one bag of concrete is needed per post.
In the United States, if you are buying concrete mixed up and ready to pour, it is typically sold by the cubic yard (3ft x 3ft x 3ft) volume. But they usually call this just a 'yard' of concrete, knowing that it is a cubic yard.
To calculate the volume of concrete needed to fill a 55-gallon drum, you first need to know the dimensions of the drum. Once you have the dimensions, you can use the formula for the volume of a cylinder (V = πr^2h) to calculate the volume of concrete required. Remember to convert the volume from gallons to cubic inches or feet for accurate results.
To calculate the amount of concrete needed for a 4x4 post, you can use the formula: volume length x width x height. For a 4x4 post, assuming a height of 8 feet, the volume would be 4 x 4 x 8 128 cubic feet. This would require approximately 1.5 cubic yards of concrete.
Typically, one bag of concrete is needed per fence post.